Order Products : sales@su-jiao.com
ICORENE® N2302
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | ICO Polymers EMEA, A Division of A. Schulman |
| Trademark: | ICORENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | V26hqb_ICORENE-N2302.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ICORENE® N2302 is a premium linear low density polyethylene powder recommended for injection moulding masterbatch where high filler acceptance is required, combined with a good flow. ICORENE® N2302 offers a unique combination of excellent processability and outstanding product properties. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.926 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 50 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 55 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 12.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 120 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 88.0 | °C | ASTM D1525 |
| Peak Melting Temperature | 123 | °C | ASTM D3418 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Xuchuan XCW-8845C | Xuchuan Chemical (Suzhou) Co., Ltd | PUR, Unspecified | Xuchuan |
| ENVIROLEX™ ENV36-NC890 | ENVIROPLAS®, Inc. | PC+PET | ENVIROLEX™ |
| OP - PPS 30GF-15PTFE | Oxford Polymers | PPS | OP - PPS |
| TECHNYL® A 216 V33 GREY 3067 | Solvay Engineering Plastics | Nylon 66 | TECHNYL® |
| ULTEM™ HU2100 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
