Order Products : sales@su-jiao.com
GLAMIDE® T-669VGB
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | TOYOBO America, Inc. |
| Trademark: | GLAMIDE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | V009GV_GLAMIDE-T-669VGB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
GLAMIDE® T-669VGB is a Polyamide 66 (Nylon 66) product filled with 35% glass fiber. It is available in North America. Characteristics include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Forms |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Specific Gravity | 1.62 | -- | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 25 | -- | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | ASTM D955 | |||
| 1.00 mm | 0.20 to 0.40 | -- | % | |
| 3.00 mm | 0.50 to 0.80 | -- | % | |
| Water Absorption | ASTM D570 | |||
| 24 hr | 0.60 | -- | % | |
| Equilibrium, 65% RH | 1.5 | -- | % |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Rockwell Hardness (R-Scale) | 120 | -- | ASTM D785 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Strength | ASTM D638 | |||
| Yield, -40°C | 230 | 210 | MPa | |
| Yield, 23°C | 180 | 145 | MPa | |
| Yield, 80°C | 125 | 100 | MPa | |
| Tensile Elongation (Break, 23°C) | 2.5 | 3.0 | % | ASTM D638 |
| Flexural Modulus | ASTM D790 | |||
| -40°C | 14000 | 13000 | MPa | |
| 23°C | 11300 | 8000 | MPa | |
| 80°C | 7000 | 5400 | MPa | |
| Flexural Strength | ASTM D790 | |||
| Yield, -40°C | 270 | 250 | MPa | |
| Yield, 23°C | 240 | 190 | MPa | |
| Yield, 80°C | 160 | 130 | MPa | |
| Taber Abrasion Resistance (1000 Cycles, CS-17 Wheel) | 26.0 | -- | mg | ASTM D1044 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Notched Izod Impact | ASTM D256 | |||
| -40°C | 110 | 110 | J/m | |
| 23°C | 140 | 170 | J/m |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | |||
| 0.45 MPa, Unannealed | 262 | -- | °C | |
| 1.8 MPa, Unannealed | 250 | -- | °C |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume Resistivity | 1.0E+15 | 1.0E+13 | ohms·cm | ASTM D257 |
| Dielectric Strength (2.00 mm) | 24 | 18 | kV/mm | ASTM D149 |
| Dielectric Constant (1 kHz) | 4.00 | -- | ASTM D150 | |
| Dissipation Factor (1 kHz) | 0.010 | -- | ASTM D150 | |
| Arc Resistance | 110 | -- | sec | ASTM D495 |
| Comparative Tracking Index | 300 | 300 | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating (0.770 mm) | V-0 | -- | UL 94 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 275 to 295 | °C | |
| Mold Temperature | 80.0 | °C | |
| Injection Pressure | 40.0 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 156 UV | RTP Company | PP Copolymer | RTP |
| Tectron H2338 | TECTRON Systems Pte Ltd | TPV | Tectron |
| EPT 3072E | Mitsui Chemicals, Inc. | EPDM | EPT |
| OKITEN® 222 A | DIOKI d.d. | LDPE | OKITEN® |
| Medalist® MD-12243 | Teknor Apex Company | TPE | Medalist™ |
