Order Products : sales@su-jiao.com
FLEXITEQ™ F65A560
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | Marplex Australia Pty. Ltd. |
| Trademark: | FLEXITEQ™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UvUXkA_FLEXITEQ-F65A560.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
FLEXITEQ™ F65A560 is a flame retardant material developed based on Santoprene™ rubber technology. It is designed to provide excellent flame retardancy to meet the stringent Underwriter's Laboratory UL94 V-0 test whilst retaining the usual benefits of the Santoprene material providing outstanding properties including soft-touch, good colourability and good mouldability. FLEXITEQ™ F65A560 can be processed on conventional thermoplastic equipment for injection moulding. 65A560 has good process thermal stability owing to very stable flame retardant system which complies with the European RoHS requirement. Note: The letters "UV" or "W" indicate additional UV stabilisation [ ie: FLEXITEQ™ F65A560UV ]. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.26 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 65 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain) | 2.00 | MPa | ASTM D412 |
| Tensile Strength 2(Break) | 3.00 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 220 | % | ASTM D412 |
| Tear Strength 4(23°C) | 19.0 | kN/m | ASTM D624 |
| Compression Set 5(23°C, 70 hr) | 30 | % | ASTM D395B |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.60 mm) | V-0 | UL 94 | |
| Glow Wire Flammability Index (1.60 mm) | 960 | °C | AS/NZS 60695.2.12 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 75.0 - 80.0 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Rear Temperature | 160 - 190 | °C | |
| Middle Temperature | 180 - 210 | °C | |
| Front Temperature | 190 - 210 | °C | |
| Processing (Melt) Temp | 190 - 210 | °C | |
| Mold Temperature | 10.0 - 50.0 | °C | |
| Injection Rate | Fast | ||
| Back Pressure | 0.300 - 0.700 | MPa | |
| Screw Speed | 100 - 200 | rpm | |
| Clamp Tonnage | 3.0 - 5.0 | kN/cm² |
| Injection instructions |
|---|
| Injection Pressure: High |
| Note Message | |
|---|---|
| 1 . | Mouth die C, 500 mm/min |
| 2 . | C mold, 500 mm/min |
| 3 . | Mouth die C, 500 mm/min |
| 4 . | C mold, 500 mm/min |
| 5 . | Type 2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Titacon® GF520 | Titan Plastics Compounds Co., Ltd. | Acetal (POM) Homopolymer | Titacon® |
| VAMPSTAT Y 35GC 04 V0 30 | Vamp Tech | Nylon 66 | VAMPSTAT |
| DENISTAT M 00U 09 E | Vamp Tech | Acetal (POM) Copolymer | DENISTAT |
| Ferro PP NPP00GT14UL NATURAL | Ferro Corporation | PP, Unspecified | Ferro PP |
| Hydrin® H55 | Zeon Chemicals L.P. | Epoxy | Hydrin® |
