Order Products : sales@su-jiao.com

Boda BDP-H7802

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	Chenguang Fluoro & Silicone Elastomers Co., Ltd.
Trademark:	Boda
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Uu5FN4_Boda-BDP-H7802.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Material Type: Black color fluoroelastomer compound, hardness Shore A 75~85.
Based on peroxide curable fluoroelastomer with high fluorine content.

Features:

Short post cure time

Excellent mold flow and mold release, resulting in less flash

Extraordinary chemical resistance:

Alcohol Fuel

Steam

Acids

Chemicals containing amines

Process methods: Suitable for compression and transfer molding processes.

Applications: Oilfield packers, heat exchanger gaskets, AED O-rings.

Lab Testing Curing Condition:

Press Curing: 10min@170°C.

Oven: (1+4)hrs@230°C

General Information
Features	Acid Resistant Alcohol Resistant Fuel Resistant Good Chemical Resistance Good Flow Good Mold Release Good Moldability Minimal Flash Steam Resistant
Uses	Gaskets
Appearance	Black
Processing Method	Compression Molding Resin Transfer Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.98	g/cm³	ASTM D792

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	83		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	27.2	MPa	ASTM D412
Tensile Elongation (Break)	280	%	ASTM D412
Compression Set ¹(200°C, 70 hr)	23	%	ASTM D395

Aging	Nominal Value	Unit	Test Method
Change in Tensile Strength in Air (250°C, 70 hr)	-11	%	ASTM D573
Change in Ultimate Elongation in Air (250°C, 70 hr)	-12	%	ASTM D573
Change in Durometer Hardness in Air (250°C, 70 hr)	1.0		ASTM D573
Change in Tensile Strength (23°C, 70 hr, in Reference Fuel C)	-5.0	%	ASTM D471
Change in Ultimate Elongation (23°C, 70 hr, in Reference Fuel C)	-8.0	%	ASTM D471
Change in Durometer Hardness (23°C, 70 hr, in Reference Fuel C)	-2.0		ASTM D471
Change in Volume (23°C, 70 hr, in Reference Fuel C)	2.0	%	ASTM D471

Note Message
1 .	6 mm Buttons

Resin Grade	Manufacturer	Category	Trademark
PROTEQ™ C35UST2	Marplex Australia Pty. Ltd.	PP Copolymer	PROTEQ™
Resinoid 1345	Resinoid Engineering Corporation	Phenolic	Resinoid
Sinkral® C 333/M2	Versalis S.p.A.	ABS	Sinkral®
Yuyao PP TL801	Yuyao Tenglong Plastics Co., Ltd.	PP, Unspecified	Yuyao PP
Exxtral™ Performance Polyolefin HMU405	ExxonMobil Chemical	TPO	Exxtral™ Performance Polyolefin