Order Products : sales@su-jiao.com

KRATON® D1101 A

Category:	SBS , Styrene Butadiene Styrene Block Copolymer
Manufacturer:	Kraton Polymers LLC
Trademark:	KRATON®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Uttvkb_KRATON-D1101-A.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Kraton D1101 A polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied from Europe in the physical forms identified as follows in the grade nomenclature:

D1101 AT - supplied as porous pellets dusted with talc

D1101 AS - supplied as porous pellets dusted with amorphous silica

D1101 ASM - supplied as powder dusted with amorphous silica

D1101 AIM - supplied as powder dusted with calcium carbonate for supply to the North American market

D1101 AU - supplied as porous pellets undusted

Kraton D1101 A polymer is used as a modifier of bitumen in roofing felt coating compounds, roads and pipe coating. It may also be suitable for use in formulating adhesives, sealants and coatings and in the modification of polymers.

General Information
Additive	Antioxidant
Features	Antioxidant Copolymer
Uses	Adhesives Asphalt Modification Coating Applications Pipe Coatings Plastics Modification Sealants
Appearance	Clear/Transparent
Forms	Pellets Powder

Physical	Nominal Value	Unit	Test Method
Density	0.940	g/cm³	ISO 2781
Apparent Density	0.40	g/cm³	ASTM D1895B
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)	< 1.0	g/10 min	ISO 1133
Solution Viscosity ¹	3000 to 5000	mPa·s	Internal Method
Bound Styrene	30.0 to 32.0	%	Internal Method
Antioxidant Additive	> 0.140		Internal Method
Ash Content
AIM	2.5 to 4.5	%	Internal Method
AS	< 0.40	%	ISO 247
ASM	2.5 to 5.0	%	ISO 247
AT	< 0.40	%	ISO 247
AU	< 0.20	%	ISO 247
Total Extractables	< 1.0	%	Internal Method
Volatile Matter	< 0.30	%	Internal Method

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore A, 30 sec)	72		ISO 868

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (300% Strain)	2.90	MPa	ISO 37
Tensile Stress (Yield)	33.0	MPa	ISO 37
Tensile Elongation (Break)	880	%	ISO 37

Note Message
1 .	25%w Toluene, 25°C

Resin Grade	Manufacturer	Category	Trademark
DOW™ HDPE DMDA-8920 HEALTH+™	The Dow Chemical Company	HDPE	DOW™ HDPE
NEOFLON™ EPW-1609BK	DAIKIN AMERICA, INC.	ETFE	NEOFLON™
ACCUCOMP™ POL052L	ACLO Compounders Inc.	PC	ACCUCOMP™
Biocycle 1000	Biocycle	Biodeg Polymers	Biocycle
Durethan® BKV 215 000000	LANXESS GmbH	Nylon Copolymer	Durethan®