Order Products : sales@su-jiao.com

Ravago Compounds HMP-304 (Roto)

Category:	LLDPE , Linear Low Density Polyethylene
Manufacturer:	Ravago Manufacturing Americas, LLC
Trademark:	Ravago Compounds
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Usscg6_Ravago-Compounds-HMP-304-Roto-.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Key Features:

35-mesh powder

Excellent long term outdoor weatherability (UV8)

Balance of toughness and rigidity

Excellent low temperature impact

Excellent environmental stress crack resistance, ESCR

Compounded for uniform additive dispersion

Standard, custom or special effect colors available

Excellent opacity available in colors

Standard, custom and natural colors available.

Stock colors may be available. See stock color bulletin

UL component recognition listing (E141240)

Also available in pellet form as HM-304

General Information
Features	Good Stiffness Good Toughness Good Weather Resistance High ESCR (Stress Crack Resist.) High Rigidity Low Temperature Impact Resistance
UL File Number	E141240
Appearance	Colors Available Natural Color Opaque
Forms	Powder
Processing Method	Rotational Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.939	g/cm³	ASTM D792
Apparent Density ¹	0.56	g/cm³	ASTM D1895
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	3.5	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance (100% Igepal, Rotational Molded, F50)	1000	hr	ASTM D1693B

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield, Rotational Molded)	19.3	MPa	ASTM D638
Tensile Elongation (Break, Rotational Molded)	400	%	ASTM D638
Flexural Modulus - Tangent (Rotational Molded)	793	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Impact Strength ²(-40°C, Rotational Molded)	92	J	ARM

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
0.45 MPa, Unannealed, Rotational Molded	64.0	°C
1.8 MPa, Unannealed, Rotational Molded	40.0	°C

Flammability	Nominal Value	Unit	Test Method
Burning Rate	26	mm/min	ASTM D635
Flame Rating			UL 94
1.52 mm	HB
3.05 mm	HB

Additional Information	Nominal Value	Unit	Test Method
Pourability ³	30.0	sec	ASTM D1895

Note Message
1 .	35-mesh powder
2 .	F50
3 .	35-mesh powder

Resin Grade	Manufacturer	Category	Trademark
RTP 203D Z	RTP Company	Nylon 612	RTP
NuSil MED-4901	NuSil Technology	Silicone Rubber, LSR	NuSil
4MID® 9B24300	4Plas	Nylon 6	4MID®
4MID® 9B32330	4Plas	Nylon 6	4MID®
CLEAREN 730L	Denka Company Limited	SBC	CLEAREN