Order Products : sales@su-jiao.com
AEI SX539
| Category: | XLPE , Crosslinked Polyethylene |
| Manufacturer: | AEI Compounds Limited |
| Trademark: | AEI |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UmrGGg_AEI-SX539.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Silane crosslinkable semi-conducting compound for medium voltage cable screening applications This is a silane crosslinkable semi-conducting polyethylene compound to be used in conjunction with silane crosslinkable insulation material for bonded shielding purposes. It is a single component system comprising a silane grafted ethylene polymer known as the graft compound SX539. Crosslinking occurs in the presence of moisture by migration of catalyst from the adjacent core insulation layer. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.16 | g/cm³ | BS 2782 620A |
| Gel Content | 30 | % | ASTM D2765 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermal deformation (120°C) | 60 | % | BS 6469 99.1 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Head Temperature | 180 | °C |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 13.0 | MPa | IEC 60811-1-1 |
| Tensile Strain (Break) | 150 | % | IEC 60811-1-1 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | IEC 60502 | ||
| 20°C | < 1.0E+2 | ohms·cm | IEC 60502 |
| 90°C | < 1.0E+3 | ohms·cm | IEC 60502 |
| Additional Information |
|---|
| Crosslinking or "Cure": The methods and duration of curing will normally be those applicable to the type of insulation material used and the radial thickness of the insulation. Curing temperature is limited to a maximum of 70°C. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 40.0 - 50.0 | °C | |
| Drying Time | > 16 | hr | |
| Cylinder Zone 1 Temp. | 130 | °C | |
| Cylinder Zone 2 Temp. | 170 | °C | |
| Cylinder Zone 3 Temp. | 180 | °C | |
| Die Temperature | 185 | °C |
| Extrusion instructions |
|---|
| Most modern thermoplastic extruders will process SX539 compound. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MarFlex® 7120B | Chevron Phillips Chemical Company LLC | LLDPE | MarFlex® |
| SCHULADUR® A3 GF 30 K2224 | A. Schulman Europe | PBT+ASA | SCHULADUR® |
| TAROLON 2520 | Taro Plast S.p.A. | PC | TAROLON |
| VECTOR® 2411 | Dexco Polymers LP | SBC | VECTOR® |
| BCC Resins MB3500 | BCC Products Inc. | PUR, Unspecified | BCC Resins |
