Order Products : sales@su-jiao.com
Matrixx 95N5156
| Category: | PC+ABS , Polycarbonate + ABS |
| Manufacturer: | The Matrixx Group, Inc. |
| Trademark: | Matrixx |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Ul1QQ0_Matrixx-95N5156.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Matrixx 95N5156 is a polycarbonate acrylonitrile butadiene styrene (PC ABS) material,. This product is available in North America,. The main features of the Matrixx 95N5156 are:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.19 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (260°C/5.0 kg) | 15 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.40 - 0.60 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 57.9 | MPa | ASTM D638 |
| Flexural Modulus | 2340 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 640 | J/m | ASTM D256 |
| Dart Drop Impact | > 36.2 | J | ASTM D5420 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 107 | °C | ASTM D648 |
| RTI Elec | 60.0 | °C | UL 746 |
| RTI Imp | 60.0 | °C | UL 746 |
| RTI | 60.0 | °C | UL 746 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.50 mm | V-0 | UL 94 | |
| 3.00 mm | 5VA | UL 94 |
| Additional Information |
|---|
| The value listed as Mold Shrinkage, ASTM D955, was tested in accordance with Matrixx test methods. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYLAN 3O 41 | POLYMA Kunststoff GmbH & Co. KG | ABS | POLYLAN |
| Mowiol® 40-88 low ash | Kuraray Co., Ltd. | PVOH | Mowiol® |
| NOVADURAN® 5010GN1-15-8S | Mitsubishi Engineering-Plastics Corp | PBT | NOVADURAN® |
| Akulon® F132 | DSM Engineering Plastics | Nylon 6 | Akulon® |
| Arnitel® PL461 | DSM Engineering Plastics | TPC-ET | Arnitel® |
