Order Products : sales@su-jiao.com
Xuchuan A-8060/B-6018
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Xuchuan Chemical (Suzhou) Co., Ltd |
| Trademark: | Xuchuan |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Ukp76o_Xuchuan-A-8060-B-6018.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Xuchuan A-8060/B-6018 is a Thermoplastic Polyurethane Elastomer (Polyester) (TPU-Polyester) product. It is available in Asia Pacific. Typical application: Consumer Goods. Characteristics include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 0.400 to 0.550 | g/cm³ | |
| Density | |||
| A-8060 : 40°C | 1.010 to 1.020 | g/cm³ | |
| B-6018 : 40°C | 1.080 to 1.200 | g/cm³ | |
| Viscosity | |||
| A-8060 : 40°C | 1.00 to 1.40 | Pa·s | |
| B-6018 : 40°C | 0.600 to 0.800 | Pa·s |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| DIN Abrasion | 130 to 200 | mm³ | |
| Ross Flex (-10°C) 1 | No Crack |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Cream Time | 6.0 to 8.0 | sec | |
| End of Rise Time | 30.0 to 40.0 | sec |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Free Rise Foam Density | 200 to 260 | kg/m³ | |
| Preheat Temperature | |||
| Part A | 50 to 60 | °C | |
| Part B | 50 to 60 | °C | |
| Preheat Time | |||
| Part A | 8.0 to 10.0 | hr | |
| Part B | 6.0 to 8.0 | hr | |
| Processing Temperature | |||
| Part A | 40 to 45 | °C | |
| Part B | 38 to 42 | °C |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness (Shore C) | 60 to 85 |
| Elastomers | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength (Break) | 3.00 to 6.50 | MPa | |
| Tensile Elongation (Break) | 450 to 640 | % | |
| Tear Strength | 15.0 to 25.0 | kN/m |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 100 | ||
| Part B | Mix Ratio by Weight: 65 to 67 | ||
| Demold Time | 5.0 to 7.0 | min |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 45.0 to 55.0 | °C |
| Note Message | |
|---|---|
| 1 . | 100000 cycles |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Radiflam® A RV300AE 984 C GRI | Radici Plastics | Nylon 66 | Radiflam® |
| Tarnamid® T-27 GF30 V0 | Grupa Azoty S.A. | Nylon 6 | Tarnamid® |
| Witcom PA6 EC | Witcom Engineering Plastics B.V. | Nylon 6 | Witcom PA6 |
| Hipolyene 4510 DH BP | Zylog Plastalloys | TPO (POE) | Hipolyene |
| MAJ'ECO EN000LA | AD majoris | Biodeg Polymers | MAJ'ECO |
