Order Products : sales@su-jiao.com
Premier HD00763
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Premier Polymers, LLC. |
| Trademark: | Premier |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Uhl2Be_Premier-HD00763.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Premier HD00763 is a high density polyethylene homopolymer used for blow molding applications where clarity and barrier properties are important, such as for food grade bottles and containers. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.963 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.70 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal) | 10.0 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 31.7 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 350 | % | ASTM D638 |
| Flexural Modulus | 1720 | MPa | ASTM D790 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 6 T 10 | Plastcom | Nylon 6 | SLOVAMID® 6 |
| Starex PT-0180 | SAMSUNG SDI CO., LTD. | ABS | Starex |
| Xuchuan XCY-5585EN | Xuchuan Chemical (Suzhou) Co., Ltd | PUR, Unspecified | Xuchuan |
| Cleapact TI-300S-1 | DIC Corporation | SBC | Cleapact |
| Jackdaw PP EV13BN6469 | Jackdaw Polymers | PP, Unspecified | Jackdaw PP |
