Order Products : sales@su-jiao.com
Micholac D2000
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | API Polymers, Inc. |
| Trademark: | Micholac |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UgwurS_Micholac-D2000.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Micholac D2000 is an Acrylonitrile Butadiene Styrene (ABS) product. It is available in North America. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/3.8 kg) | 4.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.60 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 44.1 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 35 | % | ASTM D638 |
| Flexural Modulus - Tangent | 2410 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 210 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 90.6 | °C | |
| 1.8 MPa, Unannealed | 85.0 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 76.7 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.20 | % | |
| Rear Temperature | 232 | °C | |
| Middle Temperature | 238 | °C | |
| Front Temperature | 243 | °C | |
| Nozzle Temperature | 243 | °C | |
| Processing (Melt) Temp | 249 | °C | |
| Mold Temperature | 54.4 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Silmar® SIL95BA-41 | Interplastic Corporation | Polyester, TS | Silmar® |
| TEREZ PA 6.6 7510 GF 30 FL HY /4 | TER HELL PLASTIC GMBH | Nylon 66 | TEREZ PA 6.6 |
| Adell Polyamide CR-16 | Adell Plastics, Inc. | Nylon, Unspecified | Adell Polyamide |
| KumhoSunny PBT/PET HEB4050M | Shanghai KumhoSunny Plastics Co., Ltd. | PBT+PET | KumhoSunny PBT/PET |
| LNP鈩?THERMOCOMP鈩?OF008G compound | SABIC Innovative Plastics | PPS, Linear | LNP™ THERMOCOMP™ |
