Order Products : sales@su-jiao.com
Purell GB7250
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Purell |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UglVDn_Purell-GB7250.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Purell GB7250 is an HDPE material which exhibits good flowability and high rigidity behaviours. Exceptional organoleptic properties and a good balance of stiffness, toughness and processability make Purell GB7250 the choice of customers for the production of closures for still mineral water and many other types of food and non-food caps and closures as well as tube shoulders. Without exception, all potential Healthcare Applications activities have to be discussed with the relevant Technical and Business contacts first. To discuss a Healthcare Application please contact your local Distributor or your local LyondellBasell contact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.952 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | ISO 1133 | ||
| 190°C/2.16 kg | 10 | g/10 min | |
| 190°C/5.0 kg | 28 | g/10 min | |
| Environmental Stress-Cracking Resistance 1(50°C, 2% Arkopal) | 2.50 | hr | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 61 | ISO 868 | |
| Ball Indentation Hardness (H 132/30) | 46.0 | MPa | ISO 2039-1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1000 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 24.0 | MPa | ISO 527-2 |
| Tensile Strain (Yield) | 10 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30°C | 2.0 | kJ/m² | |
| 23°C | 2.5 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 64.0 | °C | ISO 306/B50 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 190 to 230 | °C |
| Note Message | |
|---|---|
| 1 . | FNCT (Full Notch Creep Test), 6MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 6 GF 20 FRG 3 | Plastcom | Nylon 6 | SLOVAMID® 6 |
| SolVin 550GA | INOVYN | PVC Copolymer | SolVin |
| Synres-Almoco EP 3536 | Synres-Almoco BV | Epoxy | Synres-Almoco |
| Infino SC-1100R | SAMSUNG SDI CO., LTD. | PC | Infino |
| LIHAN® T706 | Nanjing Lihan Chemical Co., Ltd. | PBT | LIHAN® |
