Order Products : sales@su-jiao.com
PRIMATOP HDPE 006964
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Amco Polymers |
| Trademark: | PRIMATOP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UgYGHF_PRIMATOP-HDPE-006964.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PRIMATOP HDPE 006964 is a High Density Polyethylene material. It is available in North America for blow molding. Important attributes of PRIMATOP HDPE 006964 are:
Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.964 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.65 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal, F50) | 15.0 to 20.0 | hr | ASTM D1693A |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 30.3 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | > 300 | % | ASTM D638 |
| Flexural Modulus | 1650 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | > -118 | °C | ASTM D746 |
| Note Message | |
|---|---|
| 1 . | Type IV, 50 mm/min |
| 2 . | Type IV, 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Makrolon® 1837 | Covestro - Polycarbonates | PC | Makrolon® |
| SHIN-A SE-250 | SHIN-A T&C | Epoxy | SHIN-A |
| ASTAMID™ MB3G8HS | Marplex Australia Pty. Ltd. | Nylon 6 | ASTAMID™ |
| DuraFlex 767 | Evermore Chemical Industry Co., Ltd. | TPU-Polyester | DuraFlex |
| INEOS HDPE TUB 121 | INEOS Olefins & Polymers USA | HDPE Copolymer | INEOS HDPE |
