Order Products : sales@su-jiao.com
apifive® 3010-350
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | API SpA |
| Trademark: | apifive® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UgG28n_apifive-3010-350.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
apifive®3010-350 is a polyolefin product,. It can be processed by injection molding and is available in Europe. Typical application areas are: consumer goods. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.330 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 50 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 3.00 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 380 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 15.0 | kN/m | ASTM D624 |
| Compression Set | ASTM D395 | ||
| 23°C, 24 hr | 15 | % | ASTM D395 |
| 50°C, 6 hr | 61 | % | ASTM D395 |
| Additional Information |
|---|
| Abrasion Resistance, DIN 53515, 10 N: 350 mm³Abrasion Resistance, DIN 53515, 5 N: 150 mm³Heat Stability, API Method, 24 hr, 70°C: 2 % ShrinkageHeat Stability, API Method, 40 hr, 70°C: 0.6 % ShrinkageHardness, Asker C, 15 sec: 72Linear Expansion: 1.4 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Hopper Temperature | 90.0 - 100 | °C | |
| Processing (Melt) Temp | 90.0 - 105 | °C | |
| Mold Temperature | 175 - 185 | °C | |
| Injection Pressure | 8.00 - 10.0 | MPa | |
| Back Pressure | 0.00 - 2.00 | MPa | |
| Screw L/D Ratio | 18.0:1.0 to 20.0:1.0 |
| Injection instructions |
|---|
| Injection Speed: 6-15 g/secMold in AluminumCycle Time: 5 to 7 minFree nozzle (without valve)Max locking pressure: 20 MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NuSil MED-6755 | NuSil Technology | Silicone | NuSil |
| APEX® RM 8911 | Teknor Apex Company | PVC, Rigid | APEX® |
| Edgetek™ AT-10GF/000 NC702 | PolyOne Corporation | Acetal (POM) Copolymer | Edgetek™ |
| HK HIPS SRG100 | Hong Kong Petrochemical Co. Ltd. | PS (HIPS) | HK HIPS |
| Lifoflex® UV FLAM 70600 | Müller Kunststoffe GmbH | TPE | Lifoflex® |
