Order Products : sales@su-jiao.com
KRATON® D1184 E
| Category: | SBS , Styrene Butadiene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UfMYvA_KRATON-D1184-E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D1184 E is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied from Europe in the physical forms identified as follows in the grade nomenclature:
Kraton D1184 E polymer is used as a modifier of bitumen in roofing felt compounds, roads and pipe coating. It may also be suitable for use in formulating adhesives, sealants and coatings and in the modification of polymers. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.940 | g/cm³ | ISO 2781 |
| Apparent Density | 0.40 | g/cm³ | ASTM D1895B |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | < 1.0 | g/10 min | ISO 1133 |
| Solution Viscosity 1 | 1000 to 1400 | mPa·s | Internal Method |
| Bound Styrene | 29.0 to 31.0 | % | Internal Method |
| Antioxidant Additive | > 0.14 | % | Internal Method |
| Ash Content | ISO 247 | ||
| ES, ET | < 0.40 | % | |
| ESM | 2.5 to 5.0 | % | |
| Total Extractables | < 1.4 | % | Internal Method |
| Volatile Matter | < 0.30 | % | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 30 sec) | 75 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 2.50 | MPa | ISO 37 |
| Tensile Stress (Break) | 27.0 | MPa | ISO 37 |
| Tensile Elongation (Break) | 820 | % | ISO 37 |
| Note Message | |
|---|---|
| 1 . | 15.0%w Toluene, 25°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Radilon® S EGR1404 990 GRI | Radici Plastics | Nylon 6 | Radilon® |
| VYTEEN PC/ABS 8515 | Lavergne Group | PC+ABS | VYTEEN |
| BONDYRAM® 7103 | Polyram Ram-On Industries | MAH-g | BONDYRAM® |
| InSphere® 0513FR-P | Synthos S.A. | PS (EPS) | InSphere® |
| MAGNUM™ 3453 | Trinseo | ABS | MAGNUM™ |
