Order Products : sales@su-jiao.com

NOVAPOL® TR-0740-U

Category:	LLDPE , Linear Low Density Polyethylene
Manufacturer:	NOVA Chemicals
Trademark:	NOVAPOL®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	UeGqqp_NOVAPOLTR0740U.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

NOVAPOL®TR-0740-U is a linear low density polyethylene material,. This product is available in North America and is processed by rotational molding.

NOVAPOL®The main features of the TR-0740-U are:

flame retardant/rated flame

hexene comonomer

Good processability

Antioxidants

accessible food

Typical application areas include:

food contact applications

Water pipes/pipes/drinking water

engineering/industrial accessories

outdoor applications

home apps

General Information
Additive	Antioxidation Long-term UV-8 stabilizer
Features	UV Stabilized Low density hexene comonomer Antioxidation Impact resistance, good Workability, good Compliance of Food Exposure
Uses	Engineering accessories Household goods Outdoor application Toys
Agency Ratings	FDA 21 CFR 176.170(c), Table 2, Cond. C FDA 21 CFR 176.170(c), Table 2, Cond. D FDA 21 CFR 176.170(c), Table 2, Cond. E FDA 21 CFR 176.170(c), Table 2, Cond. F FDA 21 CFR 176.170(c), Table 2, Cond. G FDA 21 CFR 177.1520(c) 3.2a NSF 51 NSF 61 NSF STD-24
Processing Method	rotomolding

Physical	Nominal Value	Unit	Test Method
Density	0.940	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	7.0	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance (50°C, 10% Igepal, Compression Molded, F50)	110	hr	ASTM D1693B

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield, 1.90 mm, Compression Molded)	20.6	MPa	ASTM D638
Tensile Elongation ²(Yield, 1.90 mm, Compression Molded)	12	%	ASTM D638
Flexural Modulus - 1% Secant (Compression Molded)	915	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
ARM Impact - Rotational Molded			ARM
-40°C, 3.18 mm	61.0	J	ARM
-40°C, 6.35 mm	197	J	ARM

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
0.45 MPa, not annealed	60.0	°C	ASTM D648
1.8 MPa, not annealed	42.0	°C	ASTM D648
Melting Temperature	126	°C	DSC

Flammability	Nominal Value		Test Method
Flame Rating	HB		UL 94

Note Message
1 .	Type 4, 51mm/min
2 .	Type 4, 51mm/min

Resin Grade	Manufacturer	Category	Trademark
Clariant Nylon 6/6 PA-121G33	Clariant Corporation	Nylon 66	Clariant Nylon 6/6
Duron PPE/PA 830	ProPolymers Inc.	Nylon+PPE	Duron
Geon™ Vinyl Flexible XV3887	PolyOne Corporation	PVC, Flexible	Geon™ Vinyl Flexible
Hyundai EP PA66 LD380	HYUNDAI EP Co., Ltd.	Nylon 66	Hyundai EP PA66
Dow Corning® C6-150	Dow Corning Corporation	Silicone	Dow Corning®