Order Products : sales@su-jiao.com

Bormed™ LE6600-PH

Category:	LDPE , Low Density Polyethylene
Manufacturer:	Borealis AG
Trademark:	Bormed™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	UcSVTg_Bormed-LE6600-PH.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Bormed LE6600-PH is a resin intended for evaluation for use in Healthcare applications. Bormed LE6600-PH is an additive free low density polyethylene which is used to produce soft and flexible packages for pharmaceutical products. The material can be converted via blow moulding, including BFS technology, or IBM into small bottles or ampoules. However, material can as well be used in injection moulding and blown film process. The flexibility of the materials will facilitate the dosing of the medicine when used in ampoules and bottles. Bormed LE6600-PH may be sterilized by steam, ethylene oxide or gamma radiation. CAS-No.9002-88-4

Message

Bormed LE6600-PH is a resin intended for evaluation for use in Healthcare applications.

Bormed LE6600-PH is an additive free low density polyethylene which is used to produce soft and flexible packages for pharmaceutical products. The material can be converted via blow moulding, including BFS technology, or IBM into small bottles or ampoules. However, material can as well be used in injection moulding and blown film process. The flexibility of the materials will facilitate the dosing of the medicine when used in ampoules and bottles. Bormed LE6600-PH may be sterilized by steam, ethylene oxide or gamma radiation.

CAS-No.9002-88-4

General Information
Features	Good Flexibility Recyclable Material Soft
Uses	Bottles Medical/Healthcare Applications Packaging Pharmaceuticals
Processing Method	Blow Molding Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.919	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	1.5	g/10 min	ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (50.0 mm)	250	MPa	ISO 527-2
Tensile Stress (Yield)	10.0	MPa	ISO 527-2/50
Flexural Modulus	250	MPa	ISO 178

Extrusion	Nominal Value	Unit
Melt Temperature	165 to 200	°C

Resin Grade	Manufacturer	Category	Trademark
Novodur® HH-106	Styrolution	ABS	Novodur®
Nypol® PA A3 T40 VRD0240 NR373	Petropol Industry and Trade of Polymers LTDA	Nylon 66	Nypol® PA
Colorite Rigid PVC 2503	Colorite Polymers	PVC, Rigid	Colorite Rigid PVC
Geon™ Vinyl Flexible MG26	PolyOne Corporation	PVC, Flexible	Geon™ Vinyl Flexible
LNP™ THERMOCOMP™ UX06028 compound	SABIC Innovative Plastics Europe	PPA	LNP™ THERMOCOMP™