Order Products : sales@su-jiao.com
POLYCOMPO PE ACE30N
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | POLYCOMPO Co.,Ltd. |
| Trademark: | POLYCOMPO PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UbmFwS_POLYCOMPO-PE-ACE30N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
POLYCOMPO PE ACE30N is a Low Density Polyethylene product. It can be processed by blown film and is available in Asia Pacific. Typical application: Bags/Liners. Characteristics include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.926 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 0.50 | g/10 min | ISO 1133 |
| Vinyl Acetate Content | 6.0 | wt% |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 40 | ASTM D2240, ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break, Compression Molded) | 19.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, Compression Molded) | 400 | % | ISO 527-2 |
| Flexural Modulus (Compression Molded) | 140 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 82.0 | °C | ASTM D1525, ISO 306 |
| Peak Crystallization Temperature (DSC) | 102 | °C | ASTM D3418, ISO 3146 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RELENE® M60075 | Reliance Industries Limited | HDPE | RELENE® |
| Haysite Plastics EHC | Haysite Reinforced Plastics | Polyester, TS | Haysite Plastics |
| IDI STC 1023 | IDI Composites International | Polyester, TS | IDI STC |
| LUVOCOM® 1301-9017 | Lehmann & Voss & Co. | PPS | LUVOCOM® |
| SQUARE® LIM3600-60A/B | Shenzhen SQUARE Silicone Co., Ltd. | Silicone Rubber, LSR | SQUARE® |
