Order Products : sales@su-jiao.com
ResMart Repro Nylon 6 6
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | ResMart |
| Trademark: | ResMart Repro |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UYyZzk_ResMart-Repro-Nylon-6-6.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Reprocessed nylon 6 6 that provides an economical property set |
| General Information | |
|---|---|
| Recycled Content |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.14 | g/cm³ | ASTM D792 |
| Moisture Content | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 62.1 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | > 10 | % | ASTM D638 |
| Flexural Modulus | 2690 | MPa | ASTM D790 |
| Flexural Strength | 82.7 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm) | 45 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 1100 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 199 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature - Desiccant Dryer | 82.2 | °C | |
| Drying Time - Desiccant Dryer | 3.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.18 | % | |
| Processing (Melt) Temp | 277 - 299 | °C | |
| Mold Temperature | 48.9 - 90.6 | °C |
| Injection instructions |
|---|
| Dew Point: 0°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PROFIL™ PPH3GF17-BK | Pier One Polymers, Inc. | PP Homopolymer | PROFIL™ |
| CALIBRE™ 301-10 | Trinseo | PC | CALIBRE™ |
| Fluoroplex B 40 - GML | UNIFLON | PTFE | Fluoroplex |
| Geon™ Vinyl Flexible A70U0 | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
| INEOS LLDPE LL6910KJ | INEOS Olefins & Polymers Europe | LLDPE | INEOS LLDPE |
