Order Products : sales@su-jiao.com
APICAL 500AV
| Category: | Film, PI , Thermoset Polyimide |
| Manufacturer: | Kaneka Corporation |
| Trademark: | APICAL |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UWZ99p_APICAL-500AV-5206.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| APICAL 500AV is a PI Film material. It is available in Latin America or North America. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Molding Shrinkage | IPC TM-650 2.2.4 | ||
| Flow : 150°C, 30 min | < 0.10 | % | |
| Across Flow : 150°C, 30 min | < 0.10 | % | |
| Water Absorption (23°C, 24 hr) | < 3.8 | % | IPC TM-650 2.6.2 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D882A | ||
| MD : Break | > 165 | MPa | |
| TD : Break | > 165 | MPa | |
| Tensile Elongation | ASTM D882A | ||
| MD : Break | > 60 | % | |
| TD : Break | > 60 | % |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (200°C) | > 1.0E+12 | ohms·cm | ASTM D257 |
| Dielectric Strength 1(in Air) | > 120 | kV/mm | ASTM D149 |
| Dielectric Constant (1 kHz) | < 3.90 | ASTM D150 | |
| Dissipation Factor (1 kHz) | < 3.5E-3 | ASTM D150 |
| Note Message | |
|---|---|
| 1 . | 500 V/sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MTEGRITY™ PP Impact Copolymer CP502 | M. Holland Company | PP Impact Copolymer | MTEGRITY™ PP Impact Copolymer |
| ULTEM™ 1100 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
| Novalloy-S S3220 | PlastxWorld Inc. | PC+ABS | Novalloy-S |
| ESPREE™ RYY33 | SABIC Innovative Plastics | Nylon 66 | ESPREE™ |
| ALTECH® PA66 B 1000/109 | ALBIS PLASTIC GmbH | Nylon 66 | ALTECH® PA66 |
