Order Products : sales@su-jiao.com
SUMIMAC® ECR-2222K/ECH-222G
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | SBHPP |
| Trademark: | SUMIMAC® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UU1fCl_SUMIMACECR2222KECH222G.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Separated-type liquid epoxy resin Application : Ignition coil package Advantage : Good impregnation ability |
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Water absorption rate- Boiling water, 2 hrs soaking | 0.2 | wt% |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Flexural Modulus (25°C) | 8500 | MPa | |
| Flexural Strength (25°C) | 110 | MPa |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | 120 | °C | TMA |
| CLTE - Flow | 4.0E-5 | cm/cm/°C | TMA |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Component a | Mixing ratio by weight: 100 | ||
| Component B | Mixing ratio by weight: 100 | ||
| Thermoset Mix Viscosity (60°C) | 500 | cP | ASTM D2393 |
| Uncured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (25°C) | 1.70 | g/cm³ |
| Cured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 90 | ||
| Volume Resistivity (25°C) | 1.0E+16 | ohms·cm | |
| Breakdown Voltage (1.00 mm) | 33 | kV/mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| WPP PP PPH2CF2P-Natural | Washington Penn Plastic Co. Inc. | PP Homopolymer | WPP PP |
| ADDILENE PMD 50272 | ADDIPLAST | PP, Unspecified | ADDILENE |
| Bormed™ LE6609-PH | Borealis AG | LDPE | Bormed™ |
| Iupiace® GH20 | Mitsubishi Engineering-Plastics Corp | PPE+PS | Iupiace® |
| POLYblend PC/ABS 65FS GF10 | Polykemi AB | PC+ABS | POLYblend |
