Order Products : sales@su-jiao.com
NuSil FS-3781
| Category: | Silicone , Silicone |
| Manufacturer: | NuSil Technology |
| Trademark: | NuSil |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UTXS3G_NuSil-FS-3781.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections.
General Purpose: High Consistency Rubber Comment: Extrusion or Compression Molding, Precatalyzed |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Cure System | Peroxide | ||
| Operating Temperature | -50 to 200 | °C |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Color | Translucent | ||
| Density | 1.33 | g/cm³ | |
| Curing Time (120°C) | 0.50 | hr |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness (Shore A) | 30 | ||
| Tensile Strength | 5.86 | MPa | |
| Tensile Elongation at Break | 300 | % | |
| Tear Strength | 7.01 | kN/m |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tenac™-C LD755 | Asahi Kasei Chemicals Corporation | Acetal (POM) Copolymer | Tenac™-C |
| Ultramid® B3S FC R01 | BASF Corporation | Nylon 6 | Ultramid® |
| Adstif HA612M | LyondellBasell Industries | PP, High Crystal | Adstif |
| EnCom GF PC05 | EnCom, Inc. | PC | EnCom |
| Braskem PP CSP120NA | Braskem America Inc. | PP Impact Copolymer | Braskem PP |
