Order Products : sales@su-jiao.com

3M™ Dyneon™ Fluoroplastic PFA 6503PAZ

Category:	PFA , Perfluoroalkoxy
Manufacturer:	3M Advanced Materials Division
Trademark:	3M™ Dyneon™ Fluoroplastic
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	USK7Tc_3M-Dyneon-Fluoroplastic-PFA-6503PAZ.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
3M™ Dyneon™ Fluoroplastic PFA 6503PAZ is a fluorothermoplastic powder for electrostatic powder coating applications, and is designed for thin film applications where target film thickness is 25 - 40 µm per pass and up to 200 µ total film thickness. Typical application include non-stick surfaces, anti friction coatings as well as chemical protection coatings. Features Excellent Electrostatics Excellent non-stick performance Outstanding flow and fluidization Good stress crack resistance Smooth surfaces Good transparency Low friction Non-wetting Heat resistance to 260 °C High dielectric strength Cryogenic stability Chemical resistance Process targets: powder coating

Message

3M™ Dyneon™ Fluoroplastic PFA 6503PAZ is a fluorothermoplastic powder for electrostatic powder coating applications, and is designed for thin film applications where target film thickness is 25 - 40 µm per pass and up to 200 µ total film thickness. Typical application include non-stick surfaces, anti friction coatings as well as chemical protection coatings.

Features

Excellent Electrostatics

Excellent non-stick performance

Outstanding flow and fluidization

Good stress crack resistance

Smooth surfaces

Good transparency

Low friction

Non-wetting

Heat resistance to 260 °C

High dielectric strength

Cryogenic stability

Chemical resistance

Process targets: powder coating

General Information
Features	Good Chemical Resistance Good Electrical Properties Good Flow High Clarity Low Friction Non-Stick Non-Wetting
Uses	Coating Applications
Forms	Powder
Processing Method	Coating

Physical	Nominal Value	Unit	Test Method
Specific Gravity	2.15	g/cm³	ASTM D792
Apparent Density	0.80	g/cm³	DIN 53466
Melt Mass-Flow Rate (MFR) (372°C/5.0 kg)	3.0	g/10 min	ISO 1133
Particle Size	30.0	µm

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	60		ASTM D2240

Thermal	Nominal Value	Unit	Test Method
Melting Temperature	308	°C	ASTM D4591

Flammability	Nominal Value	Unit	Test Method
Oxygen Index	> 95	%	ASTM D2863

Extrusion	Nominal Value	Unit
Melt Temperature	350 to 380	°C

Resin Grade	Manufacturer	Category	Trademark
Braskem PP H 301	Braskem	PP Homopolymer	Braskem PP
Fiberfil® J-60/10	Fiberfil® Engineered Plastics Inc.	PP Homopolymer	Fiberfil®
Forprene® 6NM001A35	SO.F.TER. SPA	TPV	Forprene®
Ebalta MG 804 GF / MG 804-1	Ebalta Kunststoff GmbH	PUR, Unspecified	Ebalta
SCHULABLEND® (ABS/PC) M/MB 4302 PG	A. Schulman Europe	PC+ABS	SCHULABLEND®