Order Products : sales@su-jiao.com

KMI PP KM-169IB

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	KMI Group, Inc.
Trademark:	KMI PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	URbQHg_KMIPPKM169IB.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
KM-169IB is s high flow impact PP resin for injection molding applications. KM-169IB is a reactor-made block, PP which exhibits high rigidity as well as excellent impact strength due to the ideal combination of highly crystalline homo matrix and well designed rubber morphology. They are suitable for the injection molding of large-scale articles which require high melt flowability and complex geometries. Food Contact Application: KM-169IB meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact. Characteristics: High productivity and reduction in energy and cost Excellent balance between stiffness and impact strength Good heat stability, little volatile materials, and odor-free

Message

KM-169IB is s high flow impact PP resin for injection molding applications. KM-169IB is a reactor-made block, PP which exhibits high rigidity as well as excellent impact strength due to the ideal combination of highly crystalline homo matrix and well designed rubber morphology. They are suitable for the injection molding of large-scale articles which require high melt flowability and complex geometries.

Food Contact Application:
KM-169IB meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact.

Characteristics:

High productivity and reduction in energy and cost

Excellent balance between stiffness and impact strength

Good heat stability, little volatile materials, and odor-free

General Information
Features	Block Copolymer Rigidity, high High crystallization Impact copolymer Impact resistance, high High liquidity The smell is low to none Thermal stability, good Compliance of Food Exposure
Agency Ratings	FDA 21 CFR 177.1520
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	0.910	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	60	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)	85		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	28.4	MPa	ASTM D638
Tensile Elongation (Break)	50	%	ASTM D638
Flexural Modulus	1620	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Unnotched Izod Impact (23°C)	69	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Heat Distortion	120	°C	ASTM D648

Resin Grade	Manufacturer	Category	Trademark
Resiten® LB400	ITEN INDUSTRIES	Phenolic	Resiten®
Staramide PK005EI2	Eurostar Engineering Plastics	Nylon 6	Staramide
Wellamid® NY1615-BK	Wellman Engineering Resins	Nylon 66	Wellamid®
Braskem PE LH-218	Braskem	LLDPE	Braskem PE
Sylvin 2990-93 Green 3170	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin