Order Products : sales@su-jiao.com
Somos® NanoTool
| Category: | Unspecified , Unspecified |
| Manufacturer: | DSM Somos® |
| Trademark: | Somos® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UPz6q4_Somos-NanoTool.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DSM's Somos® NanoTool produces strong, stiff, high-temperature resistant composite parts on conventional stereolithography machines. This material is heavily filled with non-crystalline nanoparticles allowing for faster processing. It exhibits superior sidewall quality, along with excellent detail resolution compared to other composite stereolithography materials. Applications Somos® NanoTool's smooth surface quality and high initial modulus make it an excellent resin for metal plating-a growing application which saves time and money as an alternative to metal prototypes. It's also ideal for creating strong, stiff parts with excellent high heat resistance, including wind tunnel models for aerospace and automotive applications, as well as rapid tooling for injection molding. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.65 | g/cm³ | |
| Water Absorption | ASTM D570 | ||
| Equilibrium 1 | 0.15 to 0.16 | % | |
| Equilibrium 2 | 0.23 | % | |
| Viscosity (30°C) | 2.50 | Pa·s |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Poisson's Ratio | ASTM D638 | ||
| -- 3 | 0.34 to 0.38 | ||
| -- 4 | 0.29 to 0.36 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Critical Exposure | 8.30 | mJ/cm² | |
| Penetration Depth | 109.2 | µm |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness 5(Shore D) | 94 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | ASTM D638 | ||
| -- 6 | 10400 to 11200 | MPa | |
| -- 7 | 11000 to 11400 | MPa | |
| Tensile Strength | ASTM D638 | ||
| -- 8 | 66.3 to 80.3 | MPa | |
| -- 9 | 61.7 to 78.0 | MPa | |
| Tensile Elongation 10(Break) | 0.70 to 1.0 | % | ASTM D638 |
| Flexural Modulus | ASTM D790 | ||
| -- 11 | 9960 to 10200 | MPa | |
| -- 12 | 10200 to 10800 | MPa | |
| Flexural Strength | ASTM D790 | ||
| -- 13 | 103 to 149 | MPa | |
| -- 14 | 79.0 to 121 | MPa |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256A | ||
| -- 15 | 14 to 17 | J/m | |
| -- 16 | 12 to 15 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed 17 | 258 to 263 | °C | |
| 0.45 MPa, Unannealed 18 | 225 | °C | |
| 1.8 MPa, Unannealed 19 | 85.0 to 90.0 | °C | |
| 1.8 MPa, Unannealed 20 | 104 | °C | |
| Glass Transition Temperature | ASTM E1545 | ||
| -- 21 | 57.0 to 62.0 | °C | |
| -- 22 | 86.0 to 89.0 | °C | |
| CLTE - Flow | |||
| -40 to 0°C 23 | 2.5E-5 to 2.6E-5 | cm/cm/°C | ASTM E831 |
| 0 to 50°C 24 | 2.6E-5 to 3.1E-5 | cm/cm/°C | ASTM E831 |
| 0 to 50°C 25 | 3.0E-5 to 3.2E-5 | cm/cm/°C | ASTM E831 |
| 50 to 100°C 26 | 5.7E-5 to 5.9E-5 | cm/cm/°C | ASTM E831 |
| 50 to 100°C 27 | 7.6E-5 to 8.7E-5 | cm/cm/°C | ASTM E831 |
| 100 to 150°C 28 | 9.0E-5 to 9.6E-5 | cm/cm/°C | ASTM E831 |
| 100 to 150°C 29 | 9.5E-5 to 1.0E-4 | cm/cm/°C | ASTM E831 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength 30 | 16 to 17 | kV/mm | ASTM D149 |
| Dielectric Constant | |||
| 60 Hz 31 | 3.90 | ASTM D150 | |
| 60 Hz 32 | 4.00 | ASTM D150 | |
| 1 kHz 33 | 3.80 | ASTM D150 | |
| 1 kHz 34 | 3.90 | ASTM D150 | |
| 1 MHz 35 | 3.60 | ASTM D150 |
| Note Message | |
|---|---|
| 1 . | UV Postcure & Thermal Postcure |
| 2 . | UV Postcure |
| 3 . | UV Postcure |
| 4 . | UV Postcure & Thermal Postcure |
| 5 . | UV Postcure & Thermal Postcure |
| 6 . | UV Postcure & Thermal Postcure |
| 7 . | UV Postcure |
| 8 . | UV Postcure & Thermal Postcure |
| 9 . | UV Postcure |
| 10 . | UV Postcure & Thermal Postcure |
| 11 . | UV Postcure & Thermal Postcure |
| 12 . | UV Postcure |
| 13 . | UV Postcure & Thermal Postcure |
| 14 . | UV Postcure |
| 15 . | UV Postcure & Thermal Postcure |
| 16 . | UV Postcure |
| 17 . | UV Postcure & Thermal Postcure |
| 18 . | UV Postcure |
| 19 . | UV Postcure |
| 20 . | UV Postcure & Thermal Postcure |
| 21 . | UV Postcure |
| 22 . | UV Postcure & Thermal Postcure |
| 23 . | UV Postcure & Thermal Postcure |
| 24 . | UV Postcure & Thermal Postcure |
| 25 . | UV Postcure |
| 26 . | UV Postcure & Thermal Postcure |
| 27 . | UV Postcure |
| 28 . | UV Postcure |
| 29 . | UV Postcure & Thermal Postcure |
| 30 . | UV Postcure & Thermal Postcure |
| 31 . | UV Postcure & Thermal Postcure |
| 32 . | UV Postcure |
| 33 . | UV Postcure & Thermal Postcure |
| 34 . | UV Postcure |
| 35 . | UV Postcure & Thermal Postcure |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Miramid® H3CW | BASF Leuna GmbH | Nylon 6 | Miramid® |
| Spartech Polycom PP5120F B2 | Spartech Polycom | PP, Unspecified | Spartech |
| CERTENE™ PRM-35ARN | Muehlstein | PP Random Copolymer | CERTENE™ |
| Gallonprene® GP420-4503 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| Lifoflex® UVX 58.01 B045-3 | ELASTO | TPE | Lifoflex® |
