Order Products : sales@su-jiao.com
Daplen™ EF103AE
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Borealis AG |
| Trademark: | Daplen™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UPoshR_Daplen-EF103AE.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Daplen EF103AE is a 10% mineral filled elastomer modified polypropylene compound intended for injection moulding. This material has excellent balanced mechanical properties, high melt flow rate and gives a good surface quality. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.970 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 16 | g/10 min | ISO 1133 |
| Molding Shrinkage | Internal method | ||
| -- 1 | 0.85 | % | Internal method |
| 90°C, 2 hours | 0.10 | % | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1200 | MPa | ISO 527-2/1 |
| Tensile Stress (Yield) | 18.0 | MPa | ISO 527-2/50 |
| Tensile Strain | ISO 527-2/50 | ||
| Yield | 8.0 | % | ISO 527-2/50 |
| Fracture | > 100 | % | ISO 527-2/50 |
| Flexural Modulus 2 | 1200 | MPa | ISO 178 |
| Flexural Stress | 22.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| -30°C | 5.4 | kJ/m² | ISO 179/1eA |
| -20°C | 6.6 | kJ/m² | ISO 179/1A |
| 23°C | 46 | kJ/m² | ISO 179/1A |
| Charpy Unnotched Impact Strength | ISO 179/1U | ||
| -20°C | 210 | kJ/m² | ISO 179/1U |
| 23°C | No Break | ISO 179/1U | |
| Notched Izod Impact | ISO 180/1A | ||
| -20°C | 6.5 | kJ/m² | ISO 180/1A |
| 23°C | 44 | kJ/m² | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 83.0 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 48.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 40.0 | °C | ISO 306/B50 |
| CLTE - Flow (23 to 80°C) | 8.0E-5 | cm/cm/°C | Internal method |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 | hr | |
| Hopper Temperature | 40.0 - 80.0 | °C | |
| Processing (Melt) Temp | 220 - 260 | °C | |
| Mold Temperature | 30.0 - 50.0 | °C | |
| Holding Pressure | 30.0 - 60.0 | MPa |
| Injection instructions |
|---|
| Back pressure: Low to mediumScrew speed: Low to mediumFlow front speed: 100 - 200 mm/s |
| Note Message | |
|---|---|
| 1 . | disk |
| 2 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Qenos PP PPR 1060F | Qenos Pty Ltd | PP Homopolymer | Qenos PP |
| RTP 105 CC FR UV | RTP Company | PP, Unspecified | RTP |
| Sasol Polymers PP HTV145 | Sasol Polymers | PP Homopolymer | Sasol Polymers PP |
| Staramide PF004EUC | Eurostar Engineering Plastics | Nylon 6 | Staramide |
| SUMIKAEXCEL® PES 4800G | Sumitomo Chemical Co., Ltd. | PESU | SUMIKAEXCEL® PES |
