Order Products : sales@su-jiao.com

ISPLEN® PB 195 K3M

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	REPSOL
Trademark:	ISPLEN®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	UOQGhx_ISPLEN-PB-195-K3M.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
ISPLEN® PB 195 K3M is a very high fluidity heterophasic copolymer intended for injection moulding applications. It is characterised by its very high stiffness and excellent impact properties in a grade with a high melt flow index value. It is a nucleated grade and, in addition, its special antistatic formulation provides good long-term aesthetic appearance and easy demoulding, allowing to achieve faster cycle times. TYPICAL APPLICATIONS The particular characteristics of ISPLEN® PB 195 K3M provide a grade with excellent balance of mechanical properties with very high stiffness and excellent impact properties, as well as a good dimensional stability. It is widely used in: Pails Domestic and leisure furniture. Square boxes and round storage containers for consumer appliances. Thin-walled containers for exhibiting food products: ice creams, fast food, dairy products... Flowerpots, buckets, storage organizers, waste containers, trays... Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

Message

ISPLEN® PB 195 K3M is a very high fluidity heterophasic copolymer intended for injection moulding applications.
It is characterised by its very high stiffness and excellent impact properties in a grade with a high melt flow index value.

It is a nucleated grade and, in addition, its special antistatic formulation provides good long-term aesthetic appearance and easy demoulding, allowing to achieve faster cycle times.

TYPICAL APPLICATIONS
The particular characteristics of ISPLEN® PB 195 K3M provide a grade with excellent balance of mechanical properties with very high stiffness and excellent impact properties, as well as a good dimensional stability. It is widely used in:

Pails

Domestic and leisure furniture.

Square boxes and round storage containers for consumer appliances.

Thin-walled containers for exhibiting food products: ice creams, fast food, dairy products...

Flowerpots, buckets, storage organizers, waste containers, trays...

Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

General Information
Additive	Antistatic Nucleating Agent
Features	Antistatic Fast Molding Cycle Food Contact Acceptable Good Dimensional Stability Good Impact Resistance High Flow High Stiffness Nucleated
Uses	Containers Food Containers Furniture Pails Thin-walled Containers
Agency Ratings	EU Food Contact, Unspecified Rating
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.905	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	45	g/10 min	ISO 1133

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)	67		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Flexural Modulus	1500	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (23°C)	7.5	kJ/m²	ISO 179

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (0.45 MPa, Unannealed)	95.0	°C	ISO 75-2/B

Injection	Nominal Value	Unit
Processing (Melt) Temp	190 to 250	°C

Resin Grade	Manufacturer	Category	Trademark
Miramid® FP20S	BASF Leuna GmbH	Nylon 6	Miramid®
MIDILENA III PPJ1400	ROMPETROL PETROCHEMICALS S.R.L.	PP Homopolymer	MIDILENA III
Vyncolit® 2004B	Vyncolit N.V.	Epoxy	Vyncolit®
Fainplast PVC RKS 430/W-OM	Fainplast Compounds S.r.l	PVC, Rigid	Fainplast PVC
EPALINE 786A25	Epaflex Polyurethanes S.R.L.	TPU-Polyether	EPALINE