Order Products : sales@su-jiao.com
Shinko-Lac® ASA E610
| Category: | ASA , Acrylonitrile Styrene Acrylate |
| Manufacturer: | Mitsubishi Rayon America Inc. |
| Trademark: | Shinko-Lac® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UN4Umv_Shinko-Lac-ASA-E610.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Shinko-Lac® ASA E610 is an Acrylonitrile Styrene Acrylate (ASA) material. It is available in North America for extrusion. Primary attribute of Shinko-Lac® ASA E610: Impact Resistant. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.06 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (220°C/5.0 kg) | 0.40 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.30 to 0.60 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 87 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 35.3 | MPa | ASTM D638 |
| Flexural Modulus (23°C) | 1720 | MPa | ASTM D790 |
| Flexural Strength (Yield, 23°C) | 52.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 340 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 6.35 mm, Injection Molded) | 82.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 94.0 | °C | ISO 306/B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SureSpec HP-120 | Genesis Polymers | PP Homopolymer | SureSpec |
| NaturePlast PLE 003 | NaturePlast | PLA | NaturePlast |
| 4PET® 9L22120 H | 4Plas | PET | 4PET® |
| KEBAFLEX® P D40.3 | BARLOG plastics GmbH | TPC-ET | KEBAFLEX® |
| Pexidan® L/T | Saco Polymers | HDPE | Pexidan® |
