Order Products : sales@su-jiao.com
Bormed™ RF830MO
| Category: | PP Random Copolymer , Polypropylene Random Copolymer |
| Manufacturer: | Borealis AG |
| Trademark: | Bormed™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UMeumT_Bormed-RF830MO.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Bormed RF830MO is a specially modified transparent polypropylene random copolymer with high meltflow. This polymer grade is intended for production of medical and medical-related articles. It is characterized by easy processability, high transparency, high gloss and good stiffness-impact balance. In addition it can be sterilized with gamma radiation and has an excellent chemical resistance. In addition to its good physical properties and excellent transparency, this grade also yields products with good printability. Products moulded from this grade and radiated with the dose of 25 kGy have a shelf-life of 5 years, if stored below 40°C. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.905 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 20 | g/10 min | ISO 1133 |
| Molding Shrinkage | 1.0 to 2.0 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 90 | ISO 2039-2 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1150 | MPa | ISO 527-2/1 |
| Tensile Stress (Yield) | 28.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Yield) | 12 | % | ISO 527-2/50 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 6.0 | kJ/m² | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature 1(0.45 MPa, Unannealed) | 80.0 | °C | ISO 75-2/B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 220 to 250 | °C | |
| Mold Temperature | 30.0 to 40.0 | °C | |
| Injection Rate | Moderate-Fast | ||
| Holding Pressure | 20.0 to 50.0 | MPa |
| Note Message | |
|---|---|
| 1 . | Injection molded specimen |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sarlink® TPE ML-1680B BLK X (PRELIMINARY DATA) | Teknor Apex Company | TPE | Sarlink® TPE |
| SWANCOR Epoxy 901-V | SWANCOR IND. CO., LTD. | Epoxy | SWANCOR Epoxy |
| PLUSTEK PA320G6 | Polyram Ram-On Industries | Nylon 66 | PLUSTEK |
| POLIMAXX 1100RC | IRPC Public Company Limited | PP Homopolymer | POLIMAXX |
| LNP™ LUBRICOMP™ DCP32 compound | SABIC Innovative Plastics | PC | LNP™ LUBRICOMP™ |
