Order Products : sales@su-jiao.com
SABIC® PP 500P
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Saudi Basic Industries Corporation (SABIC) |
| Trademark: | SABIC® PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UKy3nw_SABICPP500P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PP Homopolymer for Raffia applications PP 500P is specially developed for producing stretched tapes with following features.
Typical Applications PP 500P can be used for producing woven bags, flexible intermediate bulk containers, ropes & twines, carpet backing, geotextiles and concrete reinforcements. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | 0.905 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 3.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 102 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 35.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 10 | % | ASTM D638 |
| Flexural Modulus - 1% Secant (Injection Molded) | 1500 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 25 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 100 | °C | ASTM D648 |
| Vicat Softening Temperature | 152 | °C | ASTM D1525 2 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 235 - 250 | °C | |
| Middle Temperature | 235 - 250 | °C | |
| Front Temperature | 235 - 250 | °C |
| Note Message | |
|---|---|
| 1 . | 23°C |
| 2 . | 标准 B (120°C/h) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| COTENE™ M1108 DIP | ICO Polymers EMEA, A Division of A. Schulman | Polyolefin, Unspecified | COTENE™ |
| Diamond ABS 3500 | Network Polymers, Inc. | ABS | Diamond ABS |
| Latamid 66 MDT05-01 | LATI S.p.A. | Nylon 66 | Latamid |
| OmniCarb™ PC/ABS 1220 CTI | OMNI Plastics, LLC | PC+ABS | OmniCarb™ |
| SCHULADUR® PCR GF30 | A. Schulman Inc. | Polyester, TP | SCHULADUR® |
