Order Products : sales@su-jiao.com
Braskem PE LL5405S
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UHd968_BraskemPELL5405S.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LL5405S is a Linear Low Density Polyethylene (LLDPE) developed for blown film extrusion. Films obtained with this product show a good processing performance balanced with good mechanical properties as well as processability. Very low gel amount. Additive: Antiblocking High Slip - High Applications: LLDPE and HDPE blends, films with low thickness for general use, bags for waste, special bags for water and protection of clothes. Process: Blown film extrusion. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.919 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction (Blown Film) | 0.10 | ASTM D1894 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D882 | ||
| MD : Broken, 40 µm, blown film | 35.0 | MPa | ASTM D882 |
| TD : Broken, 40 µm, blown film | 25.0 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Broken, 40 µm, blown film | 1000 | % | ASTM D882 |
| TD : Broken, 40 µm, blown film | 1200 | % | ASTM D882 |
| Flexural Modulus | ASTM D790 | ||
| 1% Secant, MD : 40 µm, Blown Film | 160 | MPa | ASTM D790 |
| 1% Secant, TD : 40 µm, Blown Film | 180 | MPa | ASTM D790 |
| Dart Drop Impact (40 µm, Blown Film) | 120 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 40 µm, blown film | 90 | g | ASTM D1922 |
| TD : 40 µm, blown film | 900 | g | ASTM D1922 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss | ASTM D2457 | ||
| 45 °, 40.0 µm, blown film | 55 | ASTM D2457 | |
| 60 °, 40.0 µm, blown film | 80 | ASTM D2457 | |
| Haze (40.0 µm, Blown Film) | 18 | % | ASTM D1003 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Blocking 1(40.0 µm) | 8.00 | g/100 cm² | ASTM D3354 |
| Note Message | |
|---|---|
| 1 . | Blown Film |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RABALON® PJ4300C | Mitsubishi Chemical Performance Polymers, Inc. | TPE | RABALON® |
| ExxonMobil™ PP5722E1 | ExxonMobil Chemical | PP Homopolymer | ExxonMobil™ |
| ELASTOSIL® 5100 | Wacker Chemie AG | Silicone | ELASTOSIL® |
| HiFill® PP GB30 | Techmer Engineered Solutions | PP, Unspecified | HiFill® |
| Hytrel® PC948 NC010 | DuPont Performance Polymers | TPC-ET | Hytrel® |
