Order Products : sales@su-jiao.com
SuperLite® SL551800-100 (2.0mm)
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Azdel, Inc. |
| Trademark: | SuperLite® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UHVShd_SuperLite-SL551800-100-2-0mm-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| AZDEL SuperLite SL551800-100 (2.0mm) is a low pressure, thermoformable, thermoplastic composite of polypropylene and long chopped glass fibers. Usually combined with outer layers as needed for the application (i.e.; adhesive films, barrier films, scrim, tough PP films, non-wovens, reinforcements or just the bare surface.) Typically used in non-structural applications where a very high strength to weight ratio is required, such as automotive headliners, door panels, package shelves, and other interior trim. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.968 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | < 0.020 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 8000 | MPa | ASTM D638 |
| Tensile Strength | 67.0 | MPa | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Instrumented Dart Impact | ASTM D3763 | ||
| 23°C, Energy at Peak Load | 5.00 | J | ASTM D3763 |
| 23°C, Total Energy | 9.50 | J | ASTM D3763 |
| Additional Information |
|---|
| Multi-axial Impact Peak Force, ASTM D3763, 23°C: 1400 NMass per unit area, Internal Test Method: 1800 g/m²Flexual Strength, SAE J949: 60 MPaFlexual Modulus, SAE J949: 3500 MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 6 NG GF 20 HLS | Plastcom | Nylon 6 | SLOVAMID® 6 |
| Aplax P2413GN | Ginar Technology Co., LTD. | PP, Unspecified | Aplax |
| MAXAMID™ EPDMRC0366-HSL-BK09 | Pier One Polymers, Inc. | Nylon 66 | MAXAMID™ |
| KOPPS® S23G40BL | Kolon Plastics, Inc. | PPS | KOPPS® |
| Sylvin 8773-60D Grey 9504 | Sylvin Technologies Incorporated | PVC, Rigid | Sylvin |
