Order Products : sales@su-jiao.com
Aegis® H50LN01
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Honeywell |
| Trademark: | Aegis® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UGlOGi_Aegis-H50LN01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Aegis® H50LN01 is an unfilled low/medium viscosity nylon 6 homopolymer with lubrication & nucleating agents for injection molding applications exhibiting excellent melt flow properties for filling thin sections, mold release, and reduced cycle times. It exhibits good strength, stiffness, and toughness as well as excellent heat, chemical and abrasion resistance. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.13 | g/cm³ | ASTM D1505 |
| Moisture Content | % | ASTM D6869 | |
| Relative Viscosity | 2.60 | ASTM D789 | |
| Viscosity- FAV | 49.0 | ASTM D789 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peak Melting Temperature | 220 | °C | ASTM D3418 |
| Additional Information |
|---|
| Extractable Content: <.9% using test method SOP-702-307 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Processing (Melt) Temp | 240 - 280 | °C | |
| Mold Temperature | 80.0 - 95.0 | °C | |
| Injection Pressure | 3.45 - 10.3 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rotec® ABS 1001 FRVO | ROMIRA GmbH | ABS | Rotec® ABS |
| Spartech Polycom SC1F-4090 | Spartech Polycom | ABS | Spartech |
| NEMCON H PA66 DP187 | Ovation Polymers Inc. | Nylon 66 | NEMCON H |
| DynaChar™ 2321 | Polymer Dynamix | PEBA-Ether | DynaChar™ |
| Huaxia Shenzhou DS608-D | Shandong Huaxia Shenzhou New Material Co., Ltd. | Fluoropolymer | Huaxia Shenzhou |
