Order Products : sales@su-jiao.com
Shida 2518
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | JINJIANG City SHIDA Plastic Fine Co., Ltd. |
| Trademark: | Shida |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UGHpK4_Shida2518.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Our TPE can enhance the elasticity and tenderness of products such as EVA, PE, SBS, PS, and PP during the processing. With good compatibility with EVA, it can reduce the hardness of the materials and make them more flexible and tender, EVA shooting out slippers and flat forming in particular. Hence, it upgrades shoes' rank. |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.17 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (180°C/5.0 kg) | 6.5 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 20 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 6.20 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 700 | % | ISO 527-2 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 56 | kN/m | ISO 34-1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris ABS LXR515HJ | Sincerity Australia Pty Ltd. | ABS | Sindustris ABS |
| Vydyne® R535H NT651 | Ascend Performance Materials Operations LLC | Nylon 66 | Vydyne® |
| Evoprene™ 068 | AlphaGary | SBS | Evoprene™ |
| DENISTAT N 35GC 03 | Vamp Tech | Nylon 6 | DENISTAT |
| Luran® S 777K | Styrolution | ASA | Luran® S |
