Order Products : sales@su-jiao.com
SEETEC HDPE PB150
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | LG Chem Ltd. |
| Trademark: | SEETEC HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UG1zIS_SEETEC-HDPE-PB150.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Application Fuel Tank, IBC, Jerry can, Agri-chemical container Feature This high molecular weight, hexene copolymer is tailored for high impact blow-molded containers that require:
Process : Phillips slurry process This resin meet FDA21 CFR 177.1520 Additives : Anti-Oxidants |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.946 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 6.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (F50) | > 500 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | 60 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 23.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 600 | % | ASTM D638 |
| Flexural Modulus | 830 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (23°C) | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 125 | °C | ASTM D1525 |
| Peak Melting Temperature 1 | 130 | °C | ASTM D3418 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | < 180 | °C |
| Note Message | |
|---|---|
| 1 . | Condition: 10°C/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Prime PP PO 500 | Primex Plastics Corporation | PP Copolymer | Prime PP |
| Nipoflex® 722 | TOSOH Corporation | EVA | Nipoflex® |
| Diakon® TD1020 | Lucite International Inc. | Acrylic (PMMA) | Diakon® |
| HiFill® TPU/I GF30 | Techmer Engineered Solutions | TPU-Polyether | HiFill® |
| LNP™ LUBRICOMP™ RFL26 compound | SABIC Innovative Plastics | Nylon 66 | LNP™ LUBRICOMP™ |
