Order Products : sales@su-jiao.com
TYNEC® 1600
| Category: | PC , Polycarbonate |
| Manufacturer: | Tyne Plastics LLC. |
| Trademark: | TYNEC® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UF64GG_TYNEC-1600.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Data was measured on natural colored test specimens. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 16 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.50 to 0.70 | % | ASTM D955 |
| Water Absorption | ASTM D570 | ||
| 24 hr | 0.15 | % | |
| Saturation | 0.35 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2410 | MPa | ASTM D638 |
| Tensile Strength (Break) | 68.9 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield | 5.5 | % | |
| Break | 120 | % | |
| Flexural Modulus | 2340 | MPa | ASTM D790 |
| Flexural Strength | 82.7 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm) | 690 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 132 | °C | |
| 1.8 MPa, Unannealed | 127 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+16 | ohms·cm | ASTM D257 |
| Dielectric Strength (3.18 mm, in Air) | 16 | kV/mm | ASTM D149 |
| Dielectric Constant (1 MHz) | 2.90 | ASTM D150 | |
| Dissipation Factor (1 MHz) | 0.010 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.59 mm | V-2 | ||
| 3.18 mm | V-2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYLAC® PA-737 | CHI MEI CORPORATION | ABS | POLYLAC® |
| NuSil GEL-8100 | NuSil Technology | Silicone | NuSil |
| Daelim Po1y® LD-41 | DAELIM INDUSTRIAL CO., LTD. | LDPE | Daelim Po1y® |
| DENKA EVA TEX NA610 | Denka Company Limited | EVA | DENKA EVA TEX |
| ENGAGE™ 7457 | The Dow Chemical Company | TPO (POE) | ENGAGE™ |
