Order Products : sales@su-jiao.com
RTP 1200 T-80A
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UEFAIE_RTP-1200-T-80A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| RTP 1200 T-80A is a thermoplastic polyurethane elastomer (polyether)(TPU-polyether) material,. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. The processing method is injection molding. |
| General Information | |
|---|---|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.13 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 1.0 | % | ASTM D955 |
| Moisture Content | 0.020 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 82 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 50% strain | 4.14 | MPa | ASTM D412 |
| 100% strain | 5.52 | MPa | ASTM D412 |
| 300% strain | 11.7 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 31.0 | MPa | ASTM D412 |
| Tensile Elongation (Yield) | 600 | % | ASTM D412 |
| Tear Strength 1 | 96.3 | kN/m | ASTM D624 |
| Compression Set 2(23°C, 22 hr) | 30 | % | ASTM D395B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 | °C | |
| Drying Time | 6.0 | hr | |
| Dew Point | -28.9 | °C | |
| Processing (Melt) Temp | 182 - 216 | °C | |
| Mold Temperature | 15.6 - 32.2 | °C | |
| Injection Pressure | 27.6 - 55.2 | MPa |
| Injection instructions |
|---|
| Desiccant Type Dryer Required. |
| Note Message | |
|---|---|
| 1 . | C mould |
| 2 . | Type 2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P3890 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| ELASTOSIL® R 760/70 | Wacker Chemie AG | Silicone | ELASTOSIL® R |
| HOPELEX PC-1150U | Lotte Chemical Corporation | PC | HOPELEX |
| LNP™ THERMOCOMP™ RF008H compound | SABIC Innovative Plastics | Nylon 66 | LNP™ THERMOCOMP™ |
| MACOMASS PP MM-PP HG 81 | MACOMASS Verkaufs AG | PP Homopolymer | MACOMASS PP |
