Order Products : sales@su-jiao.com
Jamplast JPAH
| Category: | Acetal (POM) Homopolymer , Acetal (POM) Homopolymer |
| Manufacturer: | Jamplast, Inc. |
| Trademark: | Jamplast |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UDzLFd_Jamplast-JPAH.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Jamplast JPAH is an Acetal (POM) Homopolymer material. It is available in North America for cast film, extrusion, injection molding, profile extrusion, or sheet extrusion. Important attributes of Jamplast JPAH are:
Typical applications include:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.53 | g/cm³ | ASTM D792 |
| Water Absorption | ASTM D570 | ||
| 23°C, 24 hr | 0.20 | % | |
| Saturation, 23°C | 0.72 | % | |
| Equilibrium, 23°C, 50% RH | 0.18 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1(23°C) | 2910 | MPa | ASTM D638 |
| Tensile Strength 2(23°C) | 50.0 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, 23°C) | 11 | % | ASTM D638 |
| Flexural Modulus (23°C) | 2710 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 31 | J/m | ASTM D256 |
| Unnotched Izod Impact (23°C) | 490 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 163 | °C | |
| 1.8 MPa, Unannealed | 95.0 | °C | |
| Melting Temperature | 178 | °C | DSC |
| CLTE | ASTM E831 | ||
| Flow : 23 to 54°C | 1.0E-4 | cm/cm/°C | |
| Transverse : 23 to 54°C | 1.0E-4 | cm/cm/°C | |
| RTI Elec | UL 746 | ||
| 1.50 mm | 105 | °C | |
| 3.00 mm | 105 | °C | |
| RTI Imp | UL 746 | ||
| 1.50 mm | 85.0 | °C | |
| 3.00 mm | 85.0 | °C | |
| RTI Str | UL 746 | ||
| 1.50 mm | 90.0 | °C | |
| 3.00 mm | 90.0 | °C |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.50 mm | HB | ||
| 3.00 mm | HB |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Suggested Max Moisture | 0.20 | % | |
| Processing (Melt) Temp | 210 to 220 | °C | |
| Mold Temperature | 80.0 to 100 | °C |
| Note Message | |
|---|---|
| 1 . | 5.1 mm/min |
| 2 . | 5.1 mm/min |
| 3 . | 5.1 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PC EC5001A | Sincerity Australia Pty Ltd. | PC | Sindustris PC |
| Moplen EP220R | LyondellBasell Industries | PP Impact Copolymer | Moplen |
| Nypol® PA A3 ST NTLA010 NR385 | Petropol Industry and Trade of Polymers LTDA | Nylon 66 | Nypol® PA |
| CYCOLAC™ INP572 resin | SABIC Innovative Plastics | ABS+SAN | CYCOLAC™ |
| CERTENE™ LLHR-735U | Muehlstein | MDPE | CERTENE™ |
