Dryflex® WS 73E150

Category: TPE , Thermoplastic Elastomer
Manufacturer: ELASTO
Trademark: Dryflex®
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: UCmyng_Dryflex-WS-73E150.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
With our Dryflex® WS range we have turned the usual water-resistant properties of thermoplastic elastomers (TPE) on their head to create materials that swell up to ten times their volume when immersed in water. These materials have been developed to expand upon contact with aqueous solutions (pH7 to 12) to form a positive seal and prevent the ingress or exit of water.

Material Science
A range of formulations have been developed to offer swell rates from 300 to 1000% when immersed in water. When there is no longer water present the compound shrinks back to its original size, a process of expansion and contraction that can be repeated an unlimited number of times.

The compounds have solid structural integrity; unlike many of the equivalent clay based products which can erode and shatter over time. Compounded in any colour, the water swellable TPE is 100% recyclable and can be processed using conventional fabricating methods, including extrusion and injection moulding. Antimicrobial versions are available.

Applications
Waterstops, building & construction, water treatment plants, tunnels, drains, sewers, tanks, automotive sealant parts, glazing, headlights and cable protection are just a few of the potential applications for Dryflex® WS materials.

We have developed softer grades which offer excellent drapability. They are an ideal choice for water stop applications where the profiles may be coiled or need to be fitted around complex structures.
General Information
Features
  • Good Chemical Resistance
  • Good Weather Resistance
  • Hydrophilic
  • Recyclable Material
Uses
  • Automotive Applications
  • Building Materials
  • Construction Applications
  • Glazing
  • Sealants
  • Tanks
Forms
  • Pellets
Processing Method
  • Extrusion
PhysicalNominal ValueUnitTest Method
Density 1.24g/cm³ISO 2781
Molding Shrinkage 1.5%
HardnessNominal ValueUnitTest Method
Shore Hardness (Shore A)73ISO 868
ThermalNominal ValueUnit
Service Temperature 1-50 to 75°C
Additional InformationNominal ValueUnit
Water Swell - 3 weeks (23°C)150%
Note Message
1 .Unstressed Material
Resin Grade Manufacturer Category Trademark
REPRO ABS RE5 Rondo Plast AB ABS REPRO
4MID® 9B22115 HUV 4Plas Nylon 6 4MID®
Adiprene® LFH 2840 Chemtura PUR-Capro Adiprene®
Algoflon® L203F Solvay Specialty Polymers PTFE Algoflon®
EcolGreen EGN200 EcolBiotech Co., Ltd PLA EcolGreen