Order Products : sales@su-jiao.com

Daelim Po1y® LL-24W

Category:	LLDPE , Linear Low Density Polyethylene
Manufacturer:	DAELIM INDUSTRIAL CO., LTD.
Trademark:	Daelim Po1y®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	UB8pRF_Daelim-Po1y-LL-24W.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Daelim Po1y®LL-24W is a linear low density polyethylene product,. It is available in the Asia-Pacific region. Daelim Po1y®LL-24W application areas include thin plates, food contact applications and water pipes/pipes/drinking water.

Features include:

High resistance to environmental stress fracture (ESCR)

Good processability

Transparency

General Information
Features	High ESCR (Stress Cracking Resistance) Workability, good Definition, high
Uses	Piping system Sheet
Agency Ratings	ASTM D 1248, I, Class A, Cat. 4 FDA 21 CFR 177.1520
Forms	Particle

Physical	Nominal Value	Unit	Test Method
Density	0.914	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	1.3	g/10 min	ASTM D1238

Films	Nominal Value	Unit	Test Method
Film Thickness - Tested	25	µm
Tensile Strength			ASTM D882
MD : Yield	12.3	MPa	ASTM D882
TD : Yield	11.3	MPa	ASTM D882
MD : Fracture	45.1	MPa	ASTM D882
TD : Fracture	34.3	MPa	ASTM D882
Tensile Elongation			ASTM D882
MD : Fracture	500	%	ASTM D882
TD : Fracture	700	%	ASTM D882
Dart Drop Impact	150	g	ASTM D1709
Elmendorf Tear Strength			ASTM D1922
MD	4.0	g	ASTM D1922
TD	11	g	ASTM D1922

Optical	Nominal Value	Unit	Test Method
Haze	19	%	ASTM D1003

Additional Information
Tear Strength, MD, ASTM D-1004: 140kg/cmTear Strength, TD, ASTM D-1004: 120kg/cm

Injection	Nominal Value	Unit
Processing (Melt) Temp	180 - 230	°C

Resin Grade	Manufacturer	Category	Trademark
RTP 2000 HC	RTP Company	PSU Alloy	RTP
PRL TP-GFMF3	Polymer Resources Ltd.	PBT	PRL
ALTECH® PC A 1000/178	ALBIS PLASTIC GmbH	PC	ALTECH® PC
Axiall PVC 1701 Clear 7002	Axiall Corporation	PVC, Flexible	Axiall PVC
HiFill® PEI GF20	Techmer Engineered Solutions	PEI	HiFill®