Order Products : sales@su-jiao.com
Geon™ Vinyl Rigid Extrusion L8761
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Geon™ Vinyl Rigid Extrusion |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UA535U_Geon-Vinyl-Rigid-Extrusion-L8761.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Geon™Vinyl Rigid Extrusion L8761 is a rigid polyvinyl chloride product,. It can be processed by extrusion and is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. Geon™The application areas of Vinyl Rigid Extrusion L8761 include water pipes/pipes/drinking water and engineering/industrial accessories. The main characteristics are: chemical resistance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.38 | g/cm³ | ASTM D792 |
| PVC Cell Classification | 12564 | ASTM D1784 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec) | 77 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 3060 | MPa | ASTM D638 |
| Tensile Strength 2(Yield) | 55.4 | MPa | ASTM D638 |
| Flexural Modulus | 3420 | MPa | ASTM D790 |
| Flexural Strength | 98.6 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256A | ||
| Transverse flow : 23°C, 3.18mm, molded | 48 | J/m | ASTM D256A |
| Flow : 23°C, 3.18mm, molded | 48 | J/m | ASTM D256A |
| Drop Impact Resistance | ASTM D4226 | ||
| 23°C 3 | 63.6 | J/cm | ASTM D4226 |
| 23°C 4 | 63.6 | J/cm | ASTM D4226 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 3.18 mm) | 71.7 | °C | ASTM D648 |
| CLTE - Flow | 5.9E-5 | cm/cm/°C | ASTM D696 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Ease of Sizing | Good | ||
| 注释：按特定颜色获取NSF清单。请联系普立万公司获取该产品已认证颜色的最新清单。 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 182 - 193 | °C |
| Note Message | |
|---|---|
| 1 . | Type 1, 5.1 mm/min |
| 2 . | Type 1, 5.1 mm/min |
| 3 . | Procedure A, C.125 Throwing |
| 4 . | Procedure B, C.125 Throwing |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shuman PC 910 | Shuman Plastics, Inc. | PC | Shuman PC |
| UNITIKA Nylon 6 A1030TF | UNITIKA Plastics Division | Nylon 6 | UNITIKA Nylon 6 |
| DOWLEX™ 2048G | The Dow Chemical Company | LLDPE | DOWLEX™ |
| Durethan® DP AKV 30 FN00 000000 | LANXESS GmbH | Nylon 66 | Durethan® |
| Laprene® 83FM00A60 | SO.F.TER. SPA | SEBS | Laprene® |
