Order Products : sales@su-jiao.com

TECHNO ABS DN5534

Category:	ABS , Acrylonitrile Butadiene Styrene
Manufacturer:	Techno Polymer America, Inc.
Trademark:	TECHNO ABS
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	U9x8ti_TECHNO-ABS-DN5534.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Super high heat resistance comparable to PC/ABS or POM resins, thus meeting automotive interior specifications

No creaking noise without grease

Low specific gravity to reduce the weight of parts

Superior moldability to enable greater design flexibility and reduced scrap

A better replacement for POM used in the automotive interior parts

General Information
Features	Good Moldability High Heat Resistance Low Friction Low Gloss
Uses	Automotive Interior Parts
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) (240°C/10.0 kg)	7.0	g/10 min	ISO 1133

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)	105		ISO 2039-2

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)	47.0	MPa	ISO 527-2
Flexural Modulus	2260	MPa	ISO 178
Flexural Stress	71.0	MPa	ISO 178
Coefficient of Friction	0.10		Internal Method

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength	14	kJ/m²	ISO 179

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (0.45 MPa, Unannealed)	89.0	°C	ISO 75-2/B

Injection	Nominal Value	Unit
Drying Temperature	98.9 to 110	°C
Drying Time	3.0 to 5.0	hr
Rear Temperature	229 to 271	°C
Middle Temperature	229 to 271	°C
Front Temperature	229 to 271	°C
Mold Temperature	100 to 160	°C

Resin Grade	Manufacturer	Category	Trademark
Veroplas SERG1	PlastxWorld Inc.	ABS	Veroplas
ADEKA EP-4100TX	Adeka Corporation	Epoxy	ADEKA
Bergamid™ A70 TM-Z BK705	PolyOne Corporation	Nylon 66	Bergamid™
AMPLIFY™ EA 100	The Dow Chemical Company	EEA	AMPLIFY™ EA
Petlon Prime A1-G50-00-BK	Petlon Polymers Ltd	Nylon 66	Petlon Prime