Order Products : sales@su-jiao.com

NuSil MED-6215

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	U8QNDh_NuSil-MED-6215.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days). Low consistency elastomers (LCEs) are useful alternatives to liquid silicone rubber (LSR) and high consistency rubber (HCR) for end users who need a low viscosity elastomer which provides other unique properties. LCEs lend themselves to applications that require a pourable, self-leveling silicone. Applications include: encapsulating a device, backfi lling a void, potting an electronic component that cannot withstand exposure to high heat, or prototyping a mold. Comments: 1.41 R.I., OPTICALLY CLEAR, LOW VISCOSITY

Message

NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days).

Low consistency elastomers (LCEs) are useful alternatives to liquid silicone rubber (LSR) and high consistency rubber (HCR) for end users who need a low viscosity elastomer which provides other unique properties.

LCEs lend themselves to applications that require a pourable, self-leveling silicone. Applications include: encapsulating a device, backfi lling a void, potting an electronic component that cannot withstand exposure to high heat, or prototyping a mold.

Comments: 1.41 R.I., OPTICALLY CLEAR, LOW VISCOSITY

General Information
Features	Good Processability Low Viscosity
Uses	Electrical/Electronic Applications Medical/Healthcare Applications
Agency Ratings	USP Class VI
Appearance	Clear/Transparent
Processing Method	Encapsulating Potting

Optical	Nominal Value
Refractive Index	1.410

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 10
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum

Uncured Properties	Nominal Value	Unit
Density	1.03	g/cm³
Viscosity
-- ¹	0.090	Pa·s
-- ²	6.0	Pa·s
Curing Time (150°C)	0.25	hr
Pot Life (25°C)	240	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	50
Tensile Strength	8.96	MPa
Tensile Elongation at Break	100	%

Note Message
1 .	Part B
2 .	Part A

Resin Grade	Manufacturer	Category	Trademark
THERMOLAST® M TM6LFT (Series: MC/LF)	KRAIBURG TPE	TPE	THERMOLAST® M
BESTNYL SI00VI12BEWX	Triesa Plastics	Nylon 6	BESTNYL
OP - PEI 30GF	Oxford Polymers	PEI	OP - PEI
OTECH PVC OW135 - Wire Jacket	OTECH Corporation	PVC, Unspecified	OTECH PVC
LNP™ COLORCOMP™ PX99848 compound	SABIC Innovative Plastics	Nylon 6	LNP™ COLORCOMP™