Category: | LLDPE , Linear Low Density Polyethylene |
Manufacturer: | Osterman & Company |
Trademark: | Osterlene® |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | U7rsgv_Osterlene-LLDO--9-918.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
LLDO-.9-918 has features for easy processability, high toughness and strength and excellent seal properties. LLDB-.9-918 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. |
General Information | |
---|---|
Features |
|
Uses |
|
Agency Ratings |
|
Forms |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Specific Gravity | 0.920 | g/cm³ | ASTM D792 |
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
Films | Nominal Value | Unit | Test Method |
---|---|---|---|
Secant Modulus - 1% Secant, MD | 175 | MPa | ASTM D882 |
Tensile Strength - MD | ASTM D882 | ||
Yield | 10.0 | MPa | |
Break | 48.0 | MPa | |
Tensile Elongation - MD (Break) | 480 | % | ASTM D882 |
Dart Drop Impact 1 | 270 | g | ASTM D1709A |
Elmendorf Tear Strength - MD | 420 | g | ASTM D1922 |
Optical | Nominal Value | Unit | Test Method |
---|---|---|---|
Gloss (45°) | 59 | ASTM D2457 | |
Haze | 10 | % | ASTM D1003 |
Note Message | |
---|---|
1 . | F50 |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
Makrolon® 6457 | Covestro - Polycarbonates | PC | Makrolon® |
THERMOLAST® K TC5GPZ (Series: GP/FG) | KRAIBURG TPE | TPE | THERMOLAST® K |
CP PRYME® Polyethylene PE100HDC-20M | Chase Plastics Services Inc. | HDPE | CP PRYME® Polyethylene |
Huaxia Shenzhou FKM 246D | Shandong Huaxia Shenzhou New Material Co., Ltd. | Fluorelastomer | Huaxia Shenzhou |
SQUARE® LIM3919-70A/B | Shenzhen SQUARE Silicone Co., Ltd. | Silicone Rubber, LSR | SQUARE® |