Order Products : sales@su-jiao.com

Pebax® MV 1074 SA 01

Category:	PEBA-Ether , Polyether Block Amide
Manufacturer:	Arkema
Trademark:	Pebax®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	U7FwAX_Pebax-MV-1074-SA-01.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Polyether block amide Pebax® MV 1074 SA 01 is a thermoplastic elastomer made of flexible and hydrophilic polyether and rigid polyamide.

Pebax® MV 1074 SA 01 is an inherently dissipative polymer and can be dry blended or compounded with a polymer matrix to lower the surface resistivity of the final part.

This hydrophilic grade when extruded into either a thin film or laminated on to a substrate offers excellent permeability to moisture vapor while remaining waterproof.

This SA grade is specially designed to food uses.

General Information
Additive	Antistatic
Features	Antistatic Hydrophilic
Uses	Blending Compounding Film Laminates Membranes Non-specific Food Applications
Processing Method	Compounding

Physical	Nominal Value	Unit	Test Method
Density	1.07	g/cm³	ISO 1183
Water Absorption			ISO 62
23°C, 24 hr	48	%
Equilibrium, 23°C, 50% RH	1.4	%

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)	40		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Break)	30.0	MPa	ISO 527-2
Tensile Strain (Break)	> 700	%	ISO 527-2
Flexural Modulus	80.0	MPa	ISO 178

Thermal	Nominal Value	Unit	Test Method
Melting Temperature	158	°C	ISO 11357-3

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	3.0E+9	ohms	IEC 60093
Volume Resistivity	2.5E+9	ohms·cm	IEC 60093
Charge Decay Time	< 1.0	sec	MIL B-81705

Optical	Nominal Value		Test Method
Refractive Index	1.502		Internal Method

Injection	Nominal Value	Unit
Drying Temperature	65.0 to 75.0	°C
Drying Time	4.0 to 6.0	hr
Processing (Melt) Temp	200 to 270	°C
Mold Temperature	25.0 to 60.0	°C

Extrusion	Nominal Value	Unit
Drying Temperature	65.0 to 75.0	°C
Drying Time	4.0 to 6.0	hr
Melt Temperature	210 to 230	°C

Resin Grade	Manufacturer	Category	Trademark
AKROMID® B3 ICF 40 black (5020)	AKRO-PLASTIC GmbH	Nylon 6	AKROMID®
Fainplast PVC CRKA 78	Fainplast Compounds S.r.l	PVC, Unspecified	Fainplast PVC
HIVOREX 5200SU	Lotte Chemical Corporation	HDPE	HIVOREX
LUBEMID A26 EL20 NATURAL	LUBEN PLAST srl	Nylon 66	LUBEMID
TechnoElast S D4000 E 2 sw	TechnoCompound GmbH	TPE	TechnoElast