Order Products : sales@su-jiao.com
Multi-Flex® TPE D4107
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Multibase, A Dow Corning Company |
| Trademark: | Multi-Flex® TPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | U4YgeP_Multi-Flex-TPE-D4107.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Multi-Flex® TPE D4107 is a Thermoplastic Elastomer (TPE) product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Primary characteristic: good processability. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.904 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 10 sec) | 44 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 276 | MPa | ASTM D790 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 14.5 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 630 | % | ASTM D412 |
| Tear Strength | 94.6 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.6 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Rear Temperature | 199 | °C | |
| Middle Temperature | 204 | °C | |
| Front Temperature | 210 | °C | |
| Nozzle Temperature | 216 | °C | |
| Processing (Melt) Temp | 216 | °C | |
| Mold Temperature | 26.7 to 37.8 | °C | |
| Injection Rate | Moderate-Fast |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 199 X 134951 A | RTP Company | PP, Unspecified | RTP |
| MELMEX MG | BIP (Oldbury) Limited | Mel Formald | MELMEX |
| Nipol® 1561 | Zeon Corporation | Latex | Nipol® |
| ADDINYL C2 | ADDIPLAST | Nylon 66/6 | ADDINYL |
| HiFill® PA4/6 GF30 HS NAT | Techmer Engineered Solutions | Nylon 46 | HiFill® |
