Order Products : sales@su-jiao.com
HANWHA 8600H
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Hanwha Chemical |
| Trademark: | HANWHA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | U3Uv3y_HANWHA-8600H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
CHNA-8600H is a high density polyethylene(HDPE) compound designed for the insulation of coaxial cable and radio frequency(RF) communication cables using a gas injection foaming process. It has excellent electrical properties and provides low attenuation at high frequency. CHNA-8600H is commonly used by blending with CLNA-8600L prior to extrusion. To obtain optimal cellular structure, a small amount of nucleating agent is recommended. Applications: 8600H&L can be used coaxial cable and radio frequency(RF) communication cables using a gas injection foaming process. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.962 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 8.5 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 25.5 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 500 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -76.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | > 1.0E+16 | ohms·cm | ASTM D257 |
| Dielectric Constant (1 MHz) | 2.35 | ASTM D150 | |
| Dissipation Factor (1 MHz) | 9.0E-5 | ASTM D150 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 160 to 200 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsan® BESNO P40 TLO | Arkema | Nylon 11 | Rilsan® |
| PRIMALENE WPP792P | Southern Polymer, Inc. | HDPE | PRIMALENE |
| Novodur® H801 | Styrolution | ABS | Novodur® |
| BMC HT12-1026 | Bulk Molding Compounds, Inc. | Polyester, TS | BMC |
| HiFill® PA6 GF15 IM1 | Techmer Engineered Solutions | Nylon 6 | HiFill® |
