Order Products : sales@su-jiao.com
ICORENE® 2550
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | ICO Polymers EMEA, A Division of A. Schulman |
| Trademark: | ICORENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | U2ngyr_ICORENE-2550.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ICORENE® 2550 is a linear low density polyethylene powder specically developed for rotational moulding. The ICORENE® 2550 has been designed for applications requiring good processability, toughness and flexibility. This grade is suitable or use in many different applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.924 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 3.6 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 13.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 1000 | % | ASTM D638 |
| Flexural Modulus | 308 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Drop Impact Resistance 1(-20°C) | 200 | J/cm | Internal Method |
| Note Message | |
|---|---|
| 1 . | Based on ISO 6603 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| S&E Wire & Cable CPE-01-266LT | S&E Specialty Polymers, LLC | PVC, Unspecified | S&E Wire & Cable |
| Milastomer™ S-702B | Mitsui Chemicals America, Inc. | TPV | Milastomer™ |
| Greene FKM 742 | Greene, Tweed & Co. | Fluorelastomer | Greene FKM |
| Grilamid® L 20 W 20 grey 9280 | EMS-GRIVORY | Nylon 12 | Grilamid® |
| Plaskon SMT-B-1N | Cookson Electronics - Semiconductor Products | Epoxy | Plaskon |
