Order Products : sales@su-jiao.com
Generic PEEK - Nano, Carbon
| Category: | PEEK , Polyetheretherketone |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | U0RgQn_Generic-PEEK---Nano-Carbon.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PEEK - Nano, Carbon This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.32 - 1.49 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (23°C) | 0.25 - 1.5 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 3920 - 13100 | MPa | ASTM D638 |
| Tensile Strength (23°C) | 82.7 - 190 | MPa | ASTM D638 |
| Tensile Elongation (Yield, 23°C) | 2.0 - 3.0 | % | ASTM D638 |
| Flexural Modulus (23°C) | 4110 - 12900 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 165 - 286 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 47 - 80 | J/m | ASTM D256 |
| Unnotched Izod Impact (23°C) | 370 - 930 | J/m | ASTM D256 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 5.1E+2 - 1.3E+8 | ohms | ASTM D257 |
| Volume Resistivity (23°C) | 10 - 2.5E+4 | ohms·cm | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 120 - 150 | °C | |
| Drying Time | 3.0 - 7.0 | hr | |
| Processing (Melt) Temp | 374 - 390 | °C | |
| Mold Temperature | 180 - 191 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PEEK - Nano, CarbonThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Nipol® SBR 1500 | Zeon Corporation | SBR, Emulsion | Nipol® SBR |
| ALCOM® PC 740/4 UV RD1231-08LD | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
| Drystar™ 0601 | Eastman Chemical Company | Copolyester | Drystar™ |
| Lushan EF528T | Guangzhou Lushan New Materials Co., Ltd | PE, Unspecified | Lushan |
| TECACOMP® PA66 TC white 4040 | Ensinger GmbH | Nylon 66 | TECACOMP® |
