Order Products : sales@su-jiao.com

Tecnoflon® FOR 7352

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	Solvay Specialty Polymers
Trademark:	Tecnoflon®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	TwYuQK_Tecnoflon-FOR-7352.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
TECNOFLON® FOR 7352 is a medium-low viscosity cure incorporated fluoroelastomer copolymer. TECNOFLON® FOR 7352 is well suited for applications where excellent compression set and superior mold release are required. Some of the basic properties of Tecnoflon® FOR 7352 are: Very good scorch safety Good mold flow Excellent mold release Lack of mold fouling TECNOFLON® FOR 7352 can be used for compression and transfer moulding of O-rings, gaskets, and seals. The product can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two-roll mills or internal mixers. The material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.

Message

TECNOFLON® FOR 7352 is a medium-low viscosity cure incorporated fluoroelastomer copolymer. TECNOFLON® FOR 7352 is well suited for applications where excellent compression set and superior mold release are required.

Some of the basic properties of Tecnoflon® FOR 7352 are:

Very good scorch safety

Good mold flow

Excellent mold release

Lack of mold fouling

TECNOFLON® FOR 7352 can be used for compression and transfer moulding of O-rings, gaskets, and seals. The product can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two-roll mills or internal mixers.
The material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.

General Information
Features	Copolymer Good Flow Good Mold Release Low Compression Set Medium-low Viscosity
Uses	Belts/Belt Repair Gaskets Hose Profiles Seals Sheet
Appearance	Off-White
Forms	Slab
Processing Method	Calendering Compounding Compression Molding Extrusion Resin Transfer Molding

Physical	Nominal Value	Unit
Mooney Viscosity ¹(ML 1+10, 121°C)	41	MU
Fluorine Content ²	66	%

Note Message
1 .	Raw polymer
2 .	Raw polymer

Resin Grade	Manufacturer	Category	Trademark
SABIC® PP 578N	Saudi Basic Industries Corporation (SABIC)	PP Homopolymer	SABIC® PP
SEPAZ™ 215A	Mando Advanced Materials Co., Ltd.	PPA	SEPAZ™
THERMORUN® 3655B/N	Mitsubishi Chemical Performance Polymers, Inc.	TPE	THERMORUN®
ESTASTIR HI 0810 V0	Cossa Polimeri S.r.l.	PS (HIPS)	ESTASTIR
Ecodear® V751X52	Toray Resin Company	PLA	Ecodear®